9.33 video is up
Thread Starter
Registered User
Joined: Dec 1998
Posts: 2,407
From: Windsor, Canada: Home of the FASTEST LT1 & LS1 6 spds :)
9.33 video is up
http://uploadfile.putfile.com/videos/26512404523.wmv
right click and save, you know the routine!
thanks to Bad95 for hosting it!
right click and save, you know the routine!
thanks to Bad95 for hosting it!
Thread Starter
Registered User
Joined: Dec 1998
Posts: 2,407
From: Windsor, Canada: Home of the FASTEST LT1 & LS1 6 spds :)
Re: 9.33 video is up
lol, well i lost to a 632 ci big block, with 2 stage fogger system on it. i don't feel to bad.
Last edited by taner; Sep 27, 2006 at 07:19 PM.
Re: 9.33 video is up
I wish I had known you were gonna be there Taner... I was at that track on the Friday night before your run.
According to the BMR site, you're running 4.10s in the 9". What sort of crazy RPM are you at when you go through the traps???
According to the BMR site, you're running 4.10s in the 9". What sort of crazy RPM are you at when you go through the traps???
Re: 9.33 video is up
Well...
Making a few assumptions here: if you are running 4.10s, crossing the line in 4th (video shows that), and running a 28" tire... you'd be turning 7300RPM at 148MPH. That's do-able with your big cam - solid roller motor, but I'd suspect you might be running a 3.90 ratio, or maybe even 3.73.
Making a few assumptions here: if you are running 4.10s, crossing the line in 4th (video shows that), and running a 28" tire... you'd be turning 7300RPM at 148MPH. That's do-able with your big cam - solid roller motor, but I'd suspect you might be running a 3.90 ratio, or maybe even 3.73.
Thread Starter
Registered User
Joined: Dec 1998
Posts: 2,407
From: Windsor, Canada: Home of the FASTEST LT1 & LS1 6 spds :)
Re: 9.33 video is up
Originally Posted by Dave '97 Z28 M6
Well...
Making a few assumptions here: if you are running 4.10s, crossing the line in 4th (video shows that), and running a 28" tire... you'd be turning 7300RPM at 148MPH. That's do-able with your big cam - solid roller motor, but I'd suspect you might be running a 3.90 ratio, or maybe even 3.73.
Making a few assumptions here: if you are running 4.10s, crossing the line in 4th (video shows that), and running a 28" tire... you'd be turning 7300RPM at 148MPH. That's do-able with your big cam - solid roller motor, but I'd suspect you might be running a 3.90 ratio, or maybe even 3.73.
Thread
Thread Starter
Forum
Replies
Last Post
CARiD
Supporting Vendor Group Purchases and Sales
0
Sep 30, 2015 05:44 AM
cmsmith
2010 - 2015 Camaro News, Sightings, Pictures, and Multimedia
0
Sep 14, 2015 09:09 PM
mark0006
2010 - 2015 Camaro News, Sightings, Pictures, and Multimedia
0
Sep 14, 2015 12:35 PM





