Black6SpdTA

What's 300-315RWHP good for at the 1/8th mile? Just curious. Mods are/will be:

MAC Mids
MAC Y-Pipe
Hollowed Cat
Hooker CB
Custom CAI
TB Bypass
Aluminum driveshaft

M6/3.42's

speed_demon24

I ran an 8.3xx with 303 rwhp. The best ever 1/8th trap was 85.86mph, all this before my 3.73's, and they were a big *** SOTP improvement over my 3.23's.

TRICK95

305RWHP and times in the sig for my '95.

95GRNZ

Damn. I have 297hp and could only pull 9.15 @ 79.55. 2.73's, 90+ degree humid weather and first time at the track might be contributors, too, though...

Hoping to be in the 8's as soon the weather cools down.

TS

MysticTeal 95 V6

I was at the local 1/8th mile track the other night... a couple of semi-stock T/A's were running 8.8's. One of them looked to have an aftermarket exhaust while the other sounded/looked to be stock, both had aftermarkets lids and both of them were A4's.

My friend in his '98 Z28 Convertible ran a best of 9.24 and it was his first time ever on a track. Another friend in a '99 T/A w/ Hooker LT's, 3" True Duals, 3.73 rear and 3000 stall on ET Streets ran a best of 8.12 w/ a bad knock sensor.

I got there too late to register my car for Test and Tune I really was looking forwards to getting some times out of it. I know on the street when I run my friend in his '98 I pull on him pretty hard. I'd think I could hit 8.6's-8.7's with my current setup

latinspice-94T/A

8.3 at 85.xx 12.9 at 107

305 rwhp

1994 A4 T/A 2400 stall TC 3.42 gears