just thought i would post up some good numbers for that cam it was my last time at track till next yearmade 4 passes and the 4th i blew my rearend
1st 12.05@111.95
2nd 12.07@111.87
3rd 12.04@111.92
pretty consistant and time for a 9 inch
60' were all in the low 1.6 area

 

Very nice numbers. That is the cam I plan on going with myself. Sorry to hear about the rear axle though, but I'm sure you knew that was to be expected. What other mods. do you have done to your car besides the cam?

 

1.6rr, ewp, msd digital 6, 54mm throttle body, 4000 stall and 3.73s, no shift kit and unported stock heads and intake i really wanted an 11 sec pass but it broke just before i had a chance

 

4000stall, wow, is that a pretty streetable converter?

 

Nice times for stock heads/small cam and very similar to what my car did with just a cam and boltons. I ran 12.01@113mph before I had Lloyd port my stock heads and after the heads, with the same cam and shortblock, it ran 11.60's@117mph. The stock rear will holdup with an auto but keep GM gears and no lower than 3.42's. I ran 10.20's@133mph on the stock rear wiith 200NX and it never broke but I was worried at those speeds. Later

 

Nice!!!


What were the 1/8 mile times?

 

What were your guys 1/8 times??

 

My car ran 7.64@89.5mph 1/8th when it ran 12.00's. It now runs 7.15@96.5mph to go 11.15@121mph N/A. Later