Computer Diagnostics and Tuning Technical discussion on diagnostics and programming of the F-body computers

wideband MAX lean when WOT...log seems good?

Thread Tools
 
Search this Thread
 
Old Apr 6, 2008 | 12:54 PM
  #1  
jay_rich's Avatar
Thread Starter
Registered User
 
Joined: Nov 2007
Posts: 811
From: Windsor, ON Canada
wideband MAX lean when WOT...log seems good?

Okay so I logged my car last night with datamaster....cruising the car is around the 14.7-15.3 range....moderate throttle is drops to 13.5 then WOT it goes MAX lean! But after getting off it it will flash 10.1 RICH then go lean.

The O2s are reading about 920-950 a side. The log seems good.

I will try to get a full WOT run logged tonite and post it up.

Jay
Old Apr 7, 2008 | 01:52 PM
  #2  
blkchevyz's Avatar
Registered User
 
Joined: Nov 1998
Posts: 575
From: St Charles MO, USA
i'd make sure you dont have any exhaust leak around the o2. i was tuning a car and it had a gasket blown out of the collector, the o2 was 2-3 inches before it and it still gave me an incorrect reading.

might want to check and make sure your not pulling on a wire for the o2 when the engine torques.
Old Apr 7, 2008 | 04:33 PM
  #3  
jay_rich's Avatar
Thread Starter
Registered User
 
Joined: Nov 2007
Posts: 811
From: Windsor, ON Canada
I shouldnt have a leak but who knows....I just got the exhaust on last weekend. New longtubes with nice kooks gaskets and a custom Y pipe. The guy uses gaskets with some kind of tar/rtv on the collectors.

Unless ,my #8 slip on primary is fooling it bc i have the Wideband in that header and when i sea foamed it i saw smoke come out of that primary.

Jay
Old Apr 8, 2008 | 01:50 PM
  #4  
blkchevyz's Avatar
Registered User
 
Joined: Nov 1998
Posts: 575
From: St Charles MO, USA
if that was the problem you would think the computers o2 sensors would see it

but you do need to fix that as well, could give you false readings
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
F'n1996Z28SS
Cars For Sale
8
Aug 23, 2023 11:19 PM
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM
marineengineer
New Member Introduction
3
Feb 9, 2015 03:59 AM
97TA-WS6-Con
Parts For Sale
7
Feb 1, 2015 01:01 PM
Fbodfather
Automotive News / Industry / Future Vehicle Discussion
25
Jun 21, 2002 04:12 PM




All times are GMT -5. The time now is 02:15 PM.