Computer Diagnostics and Tuning Technical discussion on diagnostics and programming of the F-body computers

Who to send my computer too

Thread Tools
 
Search this Thread
 
Old Jul 14, 2003 | 09:06 PM
  #1  
RacinZ's Avatar
Thread Starter
Registered User
 
Joined: Jul 2003
Posts: 157
From: Indian Rocks Beach
Who to send my computer too

Hey guys I guess I will try my computer next as some guys are telling me to which should help some of my problems, trans burning up, running rich, idle seems to load up. So who can I send my computer to. I remember reading on this Forum about a guy named Wright I believe. any help appreciated. thanks Andel and then if this doesn't work then I'm going carb!!
Old Jul 14, 2003 | 09:20 PM
  #2  
Dan K's Avatar
Registered User
 
Joined: Jul 2001
Posts: 1,009
From: so close I can taste it...
If you don't want to learn to do it yourself, then I would suggest you talk to madwolf...especially since he's a supporting member of this site.
Old Jul 14, 2003 | 09:34 PM
  #3  
RacinZ's Avatar
Thread Starter
Registered User
 
Joined: Jul 2003
Posts: 157
From: Indian Rocks Beach
Well how easy is it to do it. I do have a laptop and maybe my 13 yr old can figure it out for me. How expensive is it to send it out or by the progranmming or what ever it does.
Old Jul 14, 2003 | 10:30 PM
  #4  
Dan K's Avatar
Registered User
 
Joined: Jul 2001
Posts: 1,009
From: so close I can taste it...
Check out www.madz28.com or www.pcmforless.com

If you want to buy the stuff to do it yourself, it would probably cost you around $300. I'd suggest you look into tunercat for the programming, datamaster for logging, and get a cable from akmcables.com

I would suggest that you look into learning how to do it yourself. A mail order tune is a great way to get you started, but the only way to have it completely right is to have the car right there with you...and no mail order guy has your car.
Old Jul 14, 2003 | 10:53 PM
  #5  
RacinZ's Avatar
Thread Starter
Registered User
 
Joined: Jul 2003
Posts: 157
From: Indian Rocks Beach
Well both places seem to charge a fair price, I guess I can start with one of them to get me in the ballpark. thanks for the info Andel
Old Jul 15, 2003 | 06:06 AM
  #6  
rskrause's Avatar
Moderator
 
Joined: Dec 1969
Posts: 10,745
From: Buffalo, New York
Just a word of caution. When cars come into the shop for "tuning" running like $hit, 9/10's of the time there are one or more mechanical/electrical problems with the setup that must be corrected prior to any effective tuning. The further from stock the car is, the more likely something is messed up. Everything from plug wires being crossed, bad sensors, bad Optis (if so equipped), tired sparkplugs, to major mechanical problems. You can't tune around these kinds of things.

I'd advise taking the whole car to a shop that understands fuel injection and not just sending the PCM out, unless you are absolutely certain everything is perfect except the tune you are likely to be very disappointed and wasting your money.

Rich Krause
Old Jul 15, 2003 | 09:28 AM
  #7  
RacinZ's Avatar
Thread Starter
Registered User
 
Joined: Jul 2003
Posts: 157
From: Indian Rocks Beach
Thanks Rich, that was the first thing I did. New wires, new plugs (car didn't even run till I put plugs) wires did make a big difference. MSD digi 6 2-3 days ago and that was the biggest difference in the car. But I believe my msd is a bandaid to my car running to rich. Is the car running perfect or great No, I believe with all my mods it will not run right. My car is heavly modded.
This will probaby my last expense and then I will decide whether to go carb as I have been asking others on this forum for their input. thanks Andel
Old Jul 15, 2003 | 11:14 PM
  #8  
cd520's Avatar
Registered User
 
Joined: Nov 2002
Posts: 47
From: WV
Another vote here for Madwolf . As said though make sure everything else is ok with the vehicle.
Old Jul 16, 2003 | 08:48 AM
  #9  
RacinZ's Avatar
Thread Starter
Registered User
 
Joined: Jul 2003
Posts: 157
From: Indian Rocks Beach
Yes I hope he replies, I sent him a email couple of days ago on some questions I had. thanks Andel
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Queens94z28
Parts For Sale
1
Sep 20, 2015 08:45 PM
zk06
Parts For Sale
6
Sep 9, 2015 11:39 AM
Devinfoote87
Parts For Sale
7
Sep 4, 2015 05:52 PM
350350
Fuel and Ignition
14
Aug 11, 2015 12:03 PM
detroitmuscle
Parts For Sale
0
Jul 31, 2015 04:21 AM




All times are GMT -5. The time now is 11:52 PM.