What are the symptoms of a bad Ignition Control Module (stock)?
Thread Starter
Registered User
Joined: Oct 2002
Posts: 2,277
From: Orange Kounty, Kalifornia
What are the symptoms of a bad Ignition Control Module (stock)?
I have a 383 with a CC467 cam and the engine never ran right from the builder. I would like to check the ignition (stock ICM). How do I do that?
The symptoms are a rough idle and severe misfires above 2500 RPM. New MSD wires are on the car and a new Opti (MSD).
The symptoms are a rough idle and severe misfires above 2500 RPM. New MSD wires are on the car and a new Opti (MSD).
Registered User
Joined: Jan 2010
Posts: 193
From: Middle Village
Re: What are the symptoms of a bad Ignition Control Module (stock)?
Hi, When I put my 383 in and drove it, every time it got hot it would start to miss fire and stall. I replaced the coil same thing, I replaced the module and everything is good.Thats my 2-cents, I would try that first.Ray
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM