I am looking for a little help with adjusting WOT shift points in Tunercat. I want to shift about 5800. I adjusted the MPH tables and that did not work. I read to adjust the Kickdown shift RPM threshold which I set to 3000 rpm. From my understanding according to an old post I read at WOT it has to meet both RPM and Speed to shift. I figured if I put the RPM low I can adjust with MPH but it is not working.

Please help or point me to websites that may help.

Thanks

Jon
www.lt1nova.com
95 LT1 in 71 Nova

 

Try doing it the other way around. Set the rpm threshold about 400rpm lower than where you actually want it to shift.

 

I think I may have figured out what I was doing wrong. I was adjusting the Normal Mode Up/Down Shift Points and I think I should have been adjusting the Kickdown Mode U/Down Shift Points.

I'll reload the program and see if that does it.