on my '95 z28 M6 ive got an SES light, my skip shift light comes on but the solenoid does nothing, and my reverse is hard to get into. ive changed the #6 fuse two times and both times it blew as soon as the ignition switch is turned. dont know where to start with this one. ill be doing more reaserch myself but any extra help would be appreciated.

thanks

 

First thing is get the SES code pulled, then post the exact number.

 

There are several different things on the #6 circuit in the 95's, including:

-skip shift solenoid (why do you want it to work )
-reverse lockout solenoid
-EGR vacuum solenoid
-EVAP purge solenoid
-O2 sensor heaters
-cooling fans

You need to identify which of the above is blowing the fuse. Shoebox has the 95 wiring diagrams on his Tech Pages.

http://shbox.com/1/4th_gen_tech2.html#1995_pcm_wiring

 

yea, i will definately get someone to pull those codes tommorow. would/could a burned o2 extension grounding out somewhere cause this?

 

Sure... shorting the +12V wire in the O2 sensor to ground would certainly blow the fuse.

 

alright here are the codes i pulled...

13 left o2 sensor
26 ODM fault ccp circuit
27 ODM egr circuit
34 MAP sensor signal (low voltage)
63 right o2 sensor
77 ODM fault fan 1
83 ODM fault reverse inhibitor
84 CAGS

ill hopefully be able to get under the car here tonight to check on those o2 extensions.

 

i got it fixed. it was just a burnt o2 extension.