scanner software for a 95 3.4 VIN S
Thread Starter
Registered User
Joined: Aug 2005
Posts: 17
scanner software for a 95 3.4 VIN S
hi...i'm looking for anybody with knowledge on scanning an l32 PCM for a 93-95 3.4L V6. Tried datamaster and tunercat but no joy
if anybody can offer help, i'd appreciate it much,
thnx,
mike
if anybody can offer help, i'd appreciate it much,
thnx,
mike
Thread Starter
Registered User
Joined: Aug 2005
Posts: 17
Re: scanner software for a 95 3.4 VIN S
Okay, EFIlive has a definition for the motor, but now i'm having a problem synching the header frame. I'm using mastach serial driver with a spansys usb serial adapter. the properties seem okay and i know i'm on the right pins otherwise the software wouldn't acknowledge a handshake. I'm thinking that i'm either having a timing issue or the serial driver's not good for this pcm.
if anybody has any ideas, i'm open
thnx again
if anybody has any ideas, i'm open
thnx again
Registered User
Joined: Dec 1999
Posts: 312
From: Baltimore, MD, USA
Re: scanner software for a 95 3.4 VIN S
Originally Posted by m95
Okay, EFIlive has a definition for the motor, but now i'm having a problem synching the header frame. I'm using mastach serial driver with a spansys usb serial adapter. the properties seem okay and i know i'm on the right pins otherwise the software wouldn't acknowledge a handshake. I'm thinking that i'm either having a timing issue or the serial driver's not good for this pcm.
if anybody has any ideas, i'm open
thnx again
if anybody has any ideas, i'm open
thnx again
USB adapters are notorious for problems with ALDL reading stuff. Buy the USB cable or at least try it on a computer with a real serial port.
Thread
Thread Starter
Forum
Replies
Last Post
Nayr
LT1 Based Engine Tech
7
Mar 3, 2023 08:34 PM