need to make sure i've done things right, it's been awhile since i've done much with the car.

i've added syty injectors, 30-32#'s depending who you ask, my fuel pressure is a solid 60#. cam is 230/236XE and i just added a homemade 52 mm monoblade.

so what's my effective injector size?

for the monoblade i came up with a scaling factor of 1.492 for current displacement from stock. just use that on all the maf tables right (scaling)

and for the injectors you set the constant and scale the injector vs voltage table right?

just want to be sure.
thanks
mike