Just got my tranny back from a rebuild.....I had lost all forward gears all at once......From what what the builder said.....I have too much line pressure...causing the piston in the input drum to blow out and lock the clutches.....and also ballooning the torque coverter (Yank 3600).....What I need to know is what will be a good setting for the line pressures....I had a buddy up them about 10% above whatever they were set at with the Brian Herter tune...What do you guys recommend me setting them at...

 

I dont think there is much improvement by increasing line pressure id set the MAX to 90 psi as this is the default for an a4