Ok, here's whats going on. I'm trying to program my keyless entry remotes. I have three of them.

Car:
1997 Camaro RS Convertible
Factory Keyless Entry

I looked in my owners manual and followed the directions exactly. I know that I'm doing it right because I can get the one remote to program. The other two won't do anything.

Before you ask, here's some answers to your questions:
I have changed the batteries in all the remotes.
I went to a Chevy dealership and checked the non-programmable remotes, they checked out perfect on their device they check them on.
I cleaned out the remotes
The serial numbers on the back of them match to the working remote.


I've re-programmed the working remote several times and it always get programmed because the doors lock and unlock and the hatch opens. I've tried to program the other two first before the working one, and I get no response.

Please help me if you have any information. I would rather try fixing this problem myself because I don't want to pay a dealership anything for something as simple as this. Thank you very much!

 

Nevermind, I actually figured it out. My problem was that I was turning off the ignition after you had to turn it on and off three times. I finally got all three to program. Sorry if you read this post.