It's been raining lots, and I think my optishyte got wet and is on the way out. It was suggested I get some kind of scanner to see what the SES light is all about (it went off since then but it is evil). Do I need a cheap laptop (don't have one) or is there some kind of Nintendo Gameboy-like device that does the scanning, and how much does all this cost? I have LT1 Edit but I don't actually have LT1 Edit. By the way, if you see this post Andrew, gimme an E-mail. Any help will get you an autographed picture of me.

------------------
Skull-1 1997 Formula VF-1S
Protoculture:
OBD II LT1 Edit test subject #2, A4 with Motive 3.42s, LT4 Hotcam, G2 LCAs, Hotchkis panhard rod, real Bilstein shocks, Eibach Pros, Flowbastard muffler, ported + polished MAF, Mocoso CAI, Hypertech 160 thermo, TB bypass & airfoil, 1LE sway bars, poly bushings all over, exhaust cutout, BMR STB, 1997 17x9 SS wheels, NKG plugs, big block hood, BBK headers, Jacobs wires, Walbro 255 fuel pump, NX afterburner, times and ET not worth mentioning at 4000ft

I'll chisel your gravestone... sleep well
http://skull-leader.cz28.com

 

Somebody at least point me in the right direction.

 

You can use a desktop if you can get it close enough to the car for reading DTC's. A laptop is needed if you are going to log data while driving. I use http://www.autotap.com/. The DOS version works the best for me.
HTH
Kenny

------------------