I am running a wire to my ecm for my reverse lockout, but I dont have the correct pin in stock to tap into my ecm. So im wondering if theres another pin (in the blue connector preferably, to keep things simple) that i could steal (im doing a a4-m6 conversion). I cant find my wiring book so im kind of lost. Any help would be appreciated.

 

Use B13 on the black connector. It's 3-2 solenoid on automatics and skip shift on manuals.

On the blue connector you can use D2, D11 or D15 which is the skip shift lamp.

 

cool, thanks again Ian. I used pin 11 in the blue ecm. Worked like a charm. Than i just wired the other side of the reverse lockout to a keyed hot in the a4 harness. Thanks again. Eric L