O.k....so last night i twerked with some settings and reprogramed the computer with the EE definition file. I just changed VE tables, BLM's, timing, and spedo correction. I went to go out this morning and my speedo was off and tach stays at 400 rpm, but it was fine after i tuned it last night. So i switched to the EE_B definition file and fixed the speedo....it was way different from the EE file, but the tach is still at 400 rpm. I datalog it and the rpms and speed read correctly on the computer, but on the dash it isn't reading. Thats when i switched over to the EE_B and my speedo came back, but tach is messed up. It all datalogs fine, but the dash is messed....whats wrong?