Circuit to activate at O2 700mv or less??
#1
Circuit to activate at O2 700mv or less??
Hey guys,
Any electronics geniuses out there, can you figure out a schematic for activating a relay when the O2s go to 700mv or less at WOT?
Thanks.
Any electronics geniuses out there, can you figure out a schematic for activating a relay when the O2s go to 700mv or less at WOT?
Thanks.
#2
Well i think it could be do-able
Could pipe in 2 signals (TPS and O2 Voltage) to an processsor, and use an A/D for the O2 Voltage, and monitor the TPS for WOT. When the 2 values meet whatever conditions are set, it triggers a Relay!
I guess my question would be for what???? Alot of hard work, for what would be the benfit from doing this?
Kevin Carnell
Engineering Team
FAST-Fuel Air Spark Technology
901-375-3487
www.fuelairspark.com
www.Compcams.com
Could pipe in 2 signals (TPS and O2 Voltage) to an processsor, and use an A/D for the O2 Voltage, and monitor the TPS for WOT. When the 2 values meet whatever conditions are set, it triggers a Relay!
I guess my question would be for what???? Alot of hard work, for what would be the benfit from doing this?
Kevin Carnell
Engineering Team
FAST-Fuel Air Spark Technology
901-375-3487
www.fuelairspark.com
www.Compcams.com
#3
It's an extra safety for my N2O setup.
I got a design from a buddy using some comparators. Looks like it should only cost me a few bucks to make
I got a design from a buddy using some comparators. Looks like it should only cost me a few bucks to make
Last edited by George Debski; 10-03-2002 at 03:57 PM.
Thread
Thread Starter
Forum
Replies
Last Post
z28cam1993
General 1967-2002 F-Body Tech
14
09-09-2015 04:08 AM
PFYC
Supporting Vendor Group Purchases and Sales
0
08-07-2015 08:52 AM