well i just got a scanner module for my hypertech programmer. i figured its better than nothing untill i can buy a laptop and lt1 edit. i wrote down all the parameters in real time so they fluctuate a bit. but i would like to guys to tell me what you think so far. these figures are all at idle right now because its raining so i cant do any wot recording at the moment. but please voice your opinions. i will do wot recording once the weather lets up and ill post them here. thanks.....

engine rpms 670-701
spark: -18/20 btdc
injector pulse width bank 1 3.1-3.7ms
bank 2 3.0-3.9ms

short term fuel trim bank1 127-130
bank 2 127-130

long term fuel trim bank 1 139
bank 2 147

fuel trim cell 16

02 sensor bank 1 58-780 mv's ????
bank 1 #2 84-140mv's????

02 sensor b2 59-765mv's?????
b2#2 322-659mv's????

maf 6.0-6.9 grams per sec

closed loop
tp%0
tp volts 0.59
map .35 kpa
iac 41 counts
ect 182 degrees
iat 126 degrees while sitting at idle-went no lower than 80 degrees while going for a cruise in the neighborhood
engine load 2% a/f ratio 14.7
pc/dc 64%
pc/ac 1.10 amps
pc/rc 1.10 amps
tranz temp 157 degrees.

so what do you guys think? thanks for any info, ill be coming in here alot till i get used to all this lol

 

Do you have any particular issues you are trying to solve?

 

well something doesnt feel right the way shes running, ill know more as soon as i can do some wot logging. but does this stuff i have posted look normal to you?

 

Your running lean based on the long term fuel trims... ie: above 128, perhaps an exhaust leak of some sort?

Sorry, can't really help other then that..

Jeff

 

i know there is a slight exhaust leak in the intermedeiate pipe, but i just put my headers on 2 weeks ago and so far so good. my 02 sensors mv are jumping up and down like crazy between those numbers, anyone have any helpful links so i can learn more about all this? thanks......

 

That's normal, here's some links that I found helpful.

http://carprogrammer.com/Z28/PCM/
http://hometown.aol.com/protools4/linkss1.htm
http://magoo.noid.org/~lj
http://home.attbi.com/~kristenappel/binfiles/


Have fun.

 

these are all at WOT, with hypertech engine tuning installed.
let me know what you guys think......


TP% 98-its at 87% with the key on and engine not running?
0 retard
spark-33-34
STFTB1 - 128
B2 - 128

LTFTB1 - 146
B2 - 144

02/1B1-784MV'S
2B1-839

02/1B2-776
2B2-831
FT CELL-15
A/FR-12.2
MAP-98KPA
MAF 191.3 G/S

 

BTW, thanks for the links steve. there is alot of usefull info on those sites.