96 w/ OBD1 comm data + "learn disabled ' before and after O2 replacement

Reply Subscribe

Thread Tools

Search this Thread

Nov 30, 2005 | 02:18 PM

mike 96 ws6

Thread Starter

Registered User

Joined: May 2003

Posts: 268

From: Ocala FL

96 w/ OBD1 comm data + "learn disabled ' before and after O2 replacement

More info posted on ws6zxr.com
I got a code 63 & 64. Data showed low voltage on right O2 and "learn disabled". Sensor has now been replaced and shes running much better but I still have the "learn disabled" data in my LT1_Edit pcmcomm data stream. Please see the other thread for more details as I'm not good at typing.
Any input welcome.
Mike

Nov 30, 2005 | 03:11 PM

turbo_Z

Registered User

Joined: Nov 2001

Posts: 3,515

From: Kansas

Re: 96 w/ OBD1 comm data + "learn disabled ' before and after O2 replacement

Looks like you are getting good help over there. Did you happen to see what cells the car was running in. If learning is really disabled then youll only see cells 16 and 18. If you want you can send me your .lt1 file and Ill see if somehow one of the closed loop parameters was changed so the car wont reach closed loop.

Nov 30, 2005 | 06:29 PM

mike 96 ws6

Thread Starter

Registered User

Joined: May 2003

Posts: 268

From: Ocala FL

Re: 96 w/ OBD1 comm data + "learn disabled ' before and after O2 replacement

Quote:

Originally Posted by turbo_Z

If learning is really disabled then youll only see cells 16 and 18. If you want you can send me your .lt1 file and Ill see if somehow one of the closed loop parameters was changed so the car wont reach closed loop.

The data I posted in that thread on ws6zxr shows fuel trim cell -16 {last entry}. I'm really not very knowledgable about what that means but it was at 16 before I replaced the sensor and still is now.
I've never sent a .lt1 file but I'll try e-mailing it to you.
Thanks for your help!