putting an lt1 in a 68
Registered User
Joined: Feb 2002
Posts: 702
From: Houston, TX USA
Re: putting an lt1 in a 68
You'll need to run a new line, and add a spot in the tank for it. Or buy a new tank already setup for an internal pump and FI.
I had a fuel cell already, so I just added a fitting on the top for a return.
And the stock a/c mount out of a F-body will not clear the frame rail. Have to either notch, or change the bracket.
I had a fuel cell already, so I just added a fitting on the top for a return.
And the stock a/c mount out of a F-body will not clear the frame rail. Have to either notch, or change the bracket.
Thread Starter
Registered User
Joined: Mar 2004
Posts: 324
Re: putting an lt1 in a 68
thanks for the info.
ac problems dont bother me, i got the lt1 car minus the ac and dont plan on putting it in, i prefer to leave the windows open, i never close them, even when its 20 degrees out. -dave
ac problems dont bother me, i got the lt1 car minus the ac and dont plan on putting it in, i prefer to leave the windows open, i never close them, even when its 20 degrees out. -dave
Thread
Thread Starter
Forum
Replies
Last Post