Hi, I am in Australia and doing a full rebuild of a 68 RS Camaro.

I need help with any Suspension tips and advice anyone can offer to make them handel better.

I have heard good things about a Camaro control arm relocation template you can get, but in Australia no one has an idea on them and there isn't really any where you can go to buy parts for them.

So I was wonderin would anyone have something they could email me and / or any advice on any other suggested Suspension Modifications?

I would be so very thankful for any help anyone can offer.

Thank you again.
Francis.

 

Francis, you're talking about the Guldstrand mod. Check out this site here for great info on 1st Gen suspension.

Also, here is some good info on the Guldstrand mod.

And, of course, the template itself.

 

Thanks so much for that, I can't tell you how much you have helped. Thanks again.

 

Scoot on over to http://www.pro-touring.com and do some reading. Lots of reading There are a lot of 1st gen guys there. Including David Pozzi. That should get you in the right direction.