Classic Engine Tech 1967 - 1981 Engine Related

Anybody got a 1st gen drum brake setup for sale?

Thread Tools
 
Search this Thread
 
Old Dec 9, 2003 | 09:42 AM
  #1  
Whistler's Avatar
Thread Starter
Registered User
 
Joined: Aug 1999
Posts: 467
From: Orlando FL
Anybody got a 1st gen drum brake setup for sale?

Working or not, let me know.

Chris
Old Dec 9, 2003 | 01:29 PM
  #2  
69camaro383's Avatar
Registered User
 
Joined: Nov 2001
Posts: 31
I have a front drdum brake set up for sale.......no spindles though....if you want give me a offer
Old Dec 10, 2003 | 12:44 PM
  #3  
Damon's Avatar
Registered User
 
Joined: Dec 1969
Posts: 1,147
From: Phila., PA
Later X-body (Nova and other GM variants) used the same front end stuff as a 1st gen f-body. Many of them came with disc brakes. I don't know what years exactly swap over but I think it's 69-74 or thereabouts. I was in the reverse situation when I was trying to find parts for my 74 GTO (Ventura/Nova platform) and couldn't find tie rods, pitman arm, etc. I got the info from a guy at a place called "Bethel's Goat Farm" out in California, if memory serves (they sell GTO stuff). Might be able to track them down over the internet or otherwise.
Old Dec 10, 2003 | 06:19 PM
  #4  
Whistler's Avatar
Thread Starter
Registered User
 
Joined: Aug 1999
Posts: 467
From: Orlando FL
Sorry, I need the setup with the spindles
Old Dec 11, 2003 | 09:20 AM
  #5  
Hellbilly69's Avatar
Registered User
 
Joined: May 2003
Posts: 74
I've got a set up that I'll sell the spindles with it. It'll be about a month or so before I can get them off. I've got to order my control arms and brakes before I could get them off. It's for a 1969 Camaro however.

But when they're off you can buy them. They're four wheel drum brakes...brand spankin new pads and rotors (not 500miles on them since install) on the front and I've got pads and rotors for the back if you want those also. The things worked about as good as you could ask for drum brakes. I drove the car daily for the entire summer without a problem (then I changed the pads and rotors). You can even have the master cylinder also (non-power brakes) if you want that too.

I know you might not want to wait that long. If you are interested send me an email at bw_23@hotmail.com
Old Dec 11, 2003 | 09:25 AM
  #6  
camrat68's Avatar
Registered User
 
Joined: Jun 2003
Posts: 24
From: Central Wisconsin
Drum brakes/spindles

If you're in a rush, I have a complete set up already off the car and ready to go. It does have a bad wheel cylinder on the passenger side though.
Let me know, Thanks!

camrat68@hotmail.com
Old Dec 14, 2003 | 08:49 AM
  #7  
scooters97ss's Avatar
Registered User
 
Joined: Apr 2001
Posts: 311
From: I been everywhere, man
I have a whole 67 coupe with working four wheel drums I will sell rolling if you need a parts car.
Old Dec 14, 2003 | 11:28 PM
  #8  
Whistler's Avatar
Thread Starter
Registered User
 
Joined: Aug 1999
Posts: 467
From: Orlando FL
Hellbilly, if I havent found anything in a month, I'll drop you an email.. thanks for responding.
Old Dec 16, 2003 | 08:38 AM
  #9  
Hellbilly69's Avatar
Registered User
 
Joined: May 2003
Posts: 74
Whistler,

That'd be great...if you want to you can call my cell phone at 919-599-7354. If you leave a message and a number I'll call you back asap.
Old Dec 23, 2003 | 07:00 PM
  #10  
Toyboy's Avatar
Registered User
 
Joined: Nov 2002
Posts: 9
From: West Deptford NJ
I have a set up in NJ front steering knuckles have been removed but the rest was on a daily driver until a recent resto with a disk upgrade condition is very usable with your knuckles added cell 609-820-2028 I am located in NJ Tom
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
DirtyDaveW
Forced Induction
13
Dec 1, 2016 05:37 PM
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM
ddr698
Parts For Sale
2
Jan 9, 2015 10:05 AM
Jazsun
Cars For Sale
0
Dec 29, 2014 12:14 PM
JasonD
Site Help and Suggestions
9
Jul 15, 2002 02:17 PM




All times are GMT -5. The time now is 05:03 AM.