? # 67 Z28 convertable's
Thread Starter
Registered User
Joined: Jan 2006
Posts: 2
From: Calgary Alberta Canada
Re: ? # 67 Z28 convertable's
kbird
Thanks for taking the time to reply. Got time for some more?Do you know what casting no. dates etc were on the 67,68, 69Z motors I know that the 69,s had DZ in the #.I have what I am sure is a 67 302 crank rods and pistons. At the very least I could punch out a 67 283 block.and put on my fuelly heads. Need to track down the correct intake manifold .
Any thoughts?
Thanks for taking the time to reply. Got time for some more?Do you know what casting no. dates etc were on the 67,68, 69Z motors I know that the 69,s had DZ in the #.I have what I am sure is a 67 302 crank rods and pistons. At the very least I could punch out a 67 283 block.and put on my fuelly heads. Need to track down the correct intake manifold .
Any thoughts?
Registered User
Joined: Sep 2002
Posts: 9,705
From: Oakland, California
Re: ? # 67 Z28 convertable's
Engine Blocks
1967 MO and MP used #3892657 but that was also used for 327s and 350s
1968 MO used #3914678 again also used on 327s and 350s
1969 DZ used #3932386 and #3932388 also used by 327s and 350s
1967 MO and MP used #3892657 but that was also used for 327s and 350s
1968 MO used #3914678 again also used on 327s and 350s
1969 DZ used #3932386 and #3932388 also used by 327s and 350s
Thread
Thread Starter
Forum
Replies
Last Post
Brandon Wittmer
General 1967-2002 F-Body Tech
3
Dec 3, 2014 09:28 PM
squarehead
General 1967-2002 F-Body Tech
0
Nov 21, 2014 08:02 PM