low 12 sec 1995 m6 z28 4500
low 12 sec 1995 m6 z28 4500
I am the second owner, the first being my 50 year old uncle. Car has higher miles (202k) but runs stronger than the day it was new, burns no oil. The front suspension has 12 way adjustable QA1 R series drag shocks and 300 lb springs with maybe 10k miles on them, the rear has ws6 springs ( stiffer and .5 in lower than stock) good shocks and adjustable lower control arms. The exhaust is 1 3/4 inch pacesetter long tube headers into a 3 inch y pipe into a 3 inch hooker cat back exhaust which is all in great shape. Car is also camed and made 366 rwhp. I have the dyno sheets and everything. $4500 or $4000 on stock rims or best offer. May be open to trades for sport bike/ quad/boat.
Pics here: http://web.camaross.com/forums/showthread.php?t=541616
Mods are as follows:
-Hooker 3” catback exhaust
-Pacesetter 1 ¾” long tube headers and 3”y-pipe
-K&N FIPK Cold air intake
-52mm TPIS throttle body
-Trick flow polished intake elbow
- lt4 knock module
- 160 degree thermostat
- Manual fan switch
- Spec Stage IV clutch and billet steel flywheel
- Pro 5.0 short shifter
-Autometer shift light
- Comp cams cc 306 camshaft 230/244 .544/.576 112 lsa
- Comp cams 7/16” NSA 1.6 roller rockers
- Comp cams 918 beehive valve springs/locks/retainers
-Comp cams double roller timing set
- Meziere electric water pump in stock housing
-QA1 “R” series 12 way adjustable drag shock with 300 lb springs (front)
-Adjustable tubular lower control arms
- 18x9.5 black z06 motorsport wheels with BFG g-force sport tires (275/35/18 all around)
Pics here: http://web.camaross.com/forums/showthread.php?t=541616
Mods are as follows:
-Hooker 3” catback exhaust
-Pacesetter 1 ¾” long tube headers and 3”y-pipe
-K&N FIPK Cold air intake
-52mm TPIS throttle body
-Trick flow polished intake elbow
- lt4 knock module
- 160 degree thermostat
- Manual fan switch
- Spec Stage IV clutch and billet steel flywheel
- Pro 5.0 short shifter
-Autometer shift light
- Comp cams cc 306 camshaft 230/244 .544/.576 112 lsa
- Comp cams 7/16” NSA 1.6 roller rockers
- Comp cams 918 beehive valve springs/locks/retainers
-Comp cams double roller timing set
- Meziere electric water pump in stock housing
-QA1 “R” series 12 way adjustable drag shock with 300 lb springs (front)
-Adjustable tubular lower control arms
- 18x9.5 black z06 motorsport wheels with BFG g-force sport tires (275/35/18 all around)
Last edited by zx1216; Oct 9, 2007 at 02:27 PM.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM
dbusch22
LT1 Based Engine Tech
2
Jan 5, 2015 07:14 PM



