CAR MUST GO ASAP!!!! Blower project!!!
#1
CAR MUST GO ASAP!!!! Blower project!!!
Ok, I have a 94 Z that I was in the process of modding, got in over my head financially, and sadly now it must go. I really don't want to part this thing out but may consider it if I can't move the car. I WILL NOT remove parts already installed (motor, trans, rear, interior, etc) The car is together and runs it just needs someone with some time and tuning ability.
355 LT1
- Forged bottom end with Diamond pistons and scat rods and crank.
- 9.0 :1 compession
-LE2 heads
-Custom bauer cam
- LE ported intake
- Canton 7 qt pan
- 4 bolt main conversion W/ milodon caps
- ARP fasteners
-elec waterpump
Art Carr Tranny
-TCI 2800 stall
Stock 10 bolt W/ 3.73s
ADJ TQ arm
LCA's and relo brackets
Hooker LT Headers
Procharger P1SC
The paint is barely a year old and a custom mix.
6 pt cage installed
I need to move this thing I am ASKING 8,500. I do need to unload this car So shoot me offers. either way this car needs to be trailered home and in it's current state is not street drivable. Everything I have for this car goes with it (cover, misc sock and aftermarket parts, heater, and A/C assy.) The only pieces that are stock on this car are the driveshaft, rear, and K member with A arms. Everything else is new or refreashed. send email or pm for more pics.
daddysz28@hotmail.com
355 LT1
- Forged bottom end with Diamond pistons and scat rods and crank.
- 9.0 :1 compession
-LE2 heads
-Custom bauer cam
- LE ported intake
- Canton 7 qt pan
- 4 bolt main conversion W/ milodon caps
- ARP fasteners
-elec waterpump
Art Carr Tranny
-TCI 2800 stall
Stock 10 bolt W/ 3.73s
ADJ TQ arm
LCA's and relo brackets
Hooker LT Headers
Procharger P1SC
The paint is barely a year old and a custom mix.
6 pt cage installed
I need to move this thing I am ASKING 8,500. I do need to unload this car So shoot me offers. either way this car needs to be trailered home and in it's current state is not street drivable. Everything I have for this car goes with it (cover, misc sock and aftermarket parts, heater, and A/C assy.) The only pieces that are stock on this car are the driveshaft, rear, and K member with A arms. Everything else is new or refreashed. send email or pm for more pics.
daddysz28@hotmail.com
Last edited by fasteddie94; 11-09-2006 at 02:40 PM.
Thread
Thread Starter
Forum
Replies
Last Post