95 z28 a4 many mods
Thread Starter
Registered User
Joined: Aug 2010
Posts: 571
From: long island
95 z28 a4 many mods
i am testing waters for my 1995 camaro z28 with 96000 miles
car has many mods and was daily driven for about 7 years
car is a ttop
car is UNTUNED so plenty of power not let out yet
i have a folder filled with receipts and build sheets
car is a little rough around the edges mostly dirty no dents or scratches except for front bumper
the car had sat in front of my house,our landscaper hit front bumper with his trailer and took a chunk out of bumper. i have a brand new bumper and turn signal to go with it.
interior is black leather and driver seat is a little hammered
i am asking 6800 car is fast and reliable
motor mods:
built in winter of 04 motor and all supporting mods have close to 20000 miles on them, my job is about 3 miles away so no crazy miles were done in 7 years
ja race engines 383 stroker (built here in franklin square ny)
12.1 compression
4340 callies dragon slayer crank
crower sportsman rods
je srp pistons
cc 304 cam (car was daily driven,wanted reliability and drivability)
cc hydro lifters
cc magnum pushrods 7608
stock gm timing set
stock ported intake
190 gph fuel pump (no trap door mod)
heads:
ported
milled
3 angle valve job
1.6 comp cam roller rockers
comp cam springs 987
bolt ons:
edelbrock 58 mm throttle body
hooker long tube headers
3 inch custom hooker y pipe with three inch turn down
k&n cold air intake
200 shot nx MOTOR WAS NEVER SPRAYED all hooked up (nods,nozzles,buttons,switches lines) do not have the bottle
ignition:
msd coil
msd 6a box installed just have to hook back up
msd retard box installed just has to be hooked up again
trans:
freddie brown pro street/strip th 400
trans specialties 3000 stall
new th 400 crossmember
rear :
strange 12 bolt
3.90 gears
33 spline axels 3 series posi
lpw alum girdle
suspension:
pre "r" qa1 front adjustable shocks and springs
rear qa1 adjustable shocks
bmr torque arm (adjusted 4 degrees neg)
bmr chrome moly rear lca's
car has many mods and was daily driven for about 7 years
car is a ttop
car is UNTUNED so plenty of power not let out yet
i have a folder filled with receipts and build sheets
car is a little rough around the edges mostly dirty no dents or scratches except for front bumper
the car had sat in front of my house,our landscaper hit front bumper with his trailer and took a chunk out of bumper. i have a brand new bumper and turn signal to go with it.
interior is black leather and driver seat is a little hammered
i am asking 6800 car is fast and reliable
motor mods:
built in winter of 04 motor and all supporting mods have close to 20000 miles on them, my job is about 3 miles away so no crazy miles were done in 7 years
ja race engines 383 stroker (built here in franklin square ny)
12.1 compression
4340 callies dragon slayer crank
crower sportsman rods
je srp pistons
cc 304 cam (car was daily driven,wanted reliability and drivability)
cc hydro lifters
cc magnum pushrods 7608
stock gm timing set
stock ported intake
190 gph fuel pump (no trap door mod)
heads:
ported
milled
3 angle valve job
1.6 comp cam roller rockers
comp cam springs 987
bolt ons:
edelbrock 58 mm throttle body
hooker long tube headers
3 inch custom hooker y pipe with three inch turn down
k&n cold air intake
200 shot nx MOTOR WAS NEVER SPRAYED all hooked up (nods,nozzles,buttons,switches lines) do not have the bottle
ignition:
msd coil
msd 6a box installed just have to hook back up
msd retard box installed just has to be hooked up again
trans:
freddie brown pro street/strip th 400
trans specialties 3000 stall
new th 400 crossmember
rear :
strange 12 bolt
3.90 gears
33 spline axels 3 series posi
lpw alum girdle
suspension:
pre "r" qa1 front adjustable shocks and springs
rear qa1 adjustable shocks
bmr torque arm (adjusted 4 degrees neg)
bmr chrome moly rear lca's
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM
