95 z28 383
#1
95 z28 383
1995 Z28 Black/Grey cloth interior
383 Stroker built by Tim Allen Motorpsorts Dallas, TX
Forged internals
AFR 195
Edlebrock port matched intake
Comp Cam 268XFI HR13
Exhaust
Jet Hot LT Ceramic Coated Headers
Coated Jet Hot Y-Pipe 3"
Flowmaster pipes
Borla XR-1 muffler
Suspension
BMR Upper/Lower Adjustable Control Arms/A-Arms
BMR Adjustable Torque Arm
BMR Adjustable Panhard Rod
BMR Tubular Rear Control Arms
BMR Tubular K-Member
BMR DS Loop
Kenny Brown Double Diamond SFCs
Eibach Pro Kit
Bilstien HD
Energy Suspension Trans Mount
Ignition
MSD Digital 6 (no wire splicing)
GM Opti (3K) (gm coil)
Taylor OTVC 8MM
AC Delco platinum plugs
Intake
K&N CAI (stock MAF)
BBK 52MM TB
1LE intake elbow
Drivetrain
B&M shifter
Spec Stage 3
RAM Aluminum Flywheel
LS1 Aluminum DS
Richmond 4:10
MAC rear cover
Superior Axles
Royal Purple fluid
Brakes
Baer Track 13"
stock rear
Misc.
Walboro 255lph fuel pump
Racetronix 39# injectors
PCMforless tune
SS 10 spoke rims
15% tint
Jegs mini-high torque starter
Car has 167,141 on the odometer with 3,121 on the motor. New parts with the motor include plugs, wires, Opti, water pump, thermostat and radiator hoses. I have had this car for 11 years and I hate to have to part with it but my job requires a large amount of driving and that is just not the car to be doing it in unfortunately. There is about $20K in parts/labor into the car and many of the parts are new.
Looking for $10,700 obo. I can email pics to anyone interested, sorry couldnt get them to post on here.
Thanks. Jeff
383 Stroker built by Tim Allen Motorpsorts Dallas, TX
Forged internals
AFR 195
Edlebrock port matched intake
Comp Cam 268XFI HR13
Exhaust
Jet Hot LT Ceramic Coated Headers
Coated Jet Hot Y-Pipe 3"
Flowmaster pipes
Borla XR-1 muffler
Suspension
BMR Upper/Lower Adjustable Control Arms/A-Arms
BMR Adjustable Torque Arm
BMR Adjustable Panhard Rod
BMR Tubular Rear Control Arms
BMR Tubular K-Member
BMR DS Loop
Kenny Brown Double Diamond SFCs
Eibach Pro Kit
Bilstien HD
Energy Suspension Trans Mount
Ignition
MSD Digital 6 (no wire splicing)
GM Opti (3K) (gm coil)
Taylor OTVC 8MM
AC Delco platinum plugs
Intake
K&N CAI (stock MAF)
BBK 52MM TB
1LE intake elbow
Drivetrain
B&M shifter
Spec Stage 3
RAM Aluminum Flywheel
LS1 Aluminum DS
Richmond 4:10
MAC rear cover
Superior Axles
Royal Purple fluid
Brakes
Baer Track 13"
stock rear
Misc.
Walboro 255lph fuel pump
Racetronix 39# injectors
PCMforless tune
SS 10 spoke rims
15% tint
Jegs mini-high torque starter
Car has 167,141 on the odometer with 3,121 on the motor. New parts with the motor include plugs, wires, Opti, water pump, thermostat and radiator hoses. I have had this car for 11 years and I hate to have to part with it but my job requires a large amount of driving and that is just not the car to be doing it in unfortunately. There is about $20K in parts/labor into the car and many of the parts are new.
Looking for $10,700 obo. I can email pics to anyone interested, sorry couldnt get them to post on here.
Thanks. Jeff
Last edited by SnakeSkinner28; 02-14-2010 at 12:34 PM.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
10-31-2016 11:09 AM