93 Lt4 Heads/Cam/Intake
93 Lt4 Heads/Cam/Intake
CAR NEEDS AN OIL PUMP! That is it. NO MECHANICAL PROBLEMS OTHER THAN JUST NEEDING AN OIL PUMP!
ASKING $3,000 or LOOKING FOR TRADE FOR A CAR I CAN HOP IN A DRIVE TO WORK ASAP
Just picked up this car recently needing work and have got it tuned and running REAL good. She is a mean Street Car.
Ok so I've got a black 1993 z28 Camaro A4 black/grey cloth interior. Also it has around 116k on the clock. It has the following mods:
-Complete LT4 Conversion(Heads, Cam, Intake)
-Edelbrock shorty headers
-Hooker cat back exhaust
-K&N CAI
-Air Foil
-Exhaust cut-out
-high flow cat
-Shift Kit
-17" Rims w/ 315 Nitto 555r's on rear, 275 Sumitumo's on Front
-Front strut bar
-3.73 gears
-Air/Flow Gauge on pillar as well as oil pressure gauge
-Harwood Fiberglass Cowl Induction Hood (needs paint)
-I have a Jet Chip Stage 2 & a mail order tune by PCMforless
-New MSD coil & Plugs
-Accel 30lbs Injectors
-Transmission cooler (not installed)
-Dual chrome exhaust tips (not installed)
There is a 3"x3"spot on the rear quarter that has bondo on it. You can see on the inside that it is a small dent that someone has pulled out. I didn't put it there; it was there when I bought the car. It does need sanded out. The hood is flat black and has not been painted.
The Tranny goes into reverse and rolls backwards at just a hair bit of gas, but if you try to back up quick it slips out. I have a rebuilt 700r4 with a 3600 stall i could throw in for 300$
When i got it, it wasn't running very well due to tuning issues. I put some larger injectors and got a reflash and the thing runs like a raped ape. New plugs were also a +++.
I would like 4,300$ like it sits or 4,600$ with the extra tranny.
Also would be VERY interested in a more streetable car. Maybe some bolt ons, Preferabbly a 6 Speed.
I have an engine pic on this link...









ASKING $3,000 or LOOKING FOR TRADE FOR A CAR I CAN HOP IN A DRIVE TO WORK ASAP
Just picked up this car recently needing work and have got it tuned and running REAL good. She is a mean Street Car.
Ok so I've got a black 1993 z28 Camaro A4 black/grey cloth interior. Also it has around 116k on the clock. It has the following mods:
-Complete LT4 Conversion(Heads, Cam, Intake)
-Edelbrock shorty headers
-Hooker cat back exhaust
-K&N CAI
-Air Foil
-Exhaust cut-out
-high flow cat
-Shift Kit
-17" Rims w/ 315 Nitto 555r's on rear, 275 Sumitumo's on Front
-Front strut bar
-3.73 gears
-Air/Flow Gauge on pillar as well as oil pressure gauge
-Harwood Fiberglass Cowl Induction Hood (needs paint)
-I have a Jet Chip Stage 2 & a mail order tune by PCMforless
-New MSD coil & Plugs
-Accel 30lbs Injectors
-Transmission cooler (not installed)
-Dual chrome exhaust tips (not installed)
There is a 3"x3"spot on the rear quarter that has bondo on it. You can see on the inside that it is a small dent that someone has pulled out. I didn't put it there; it was there when I bought the car. It does need sanded out. The hood is flat black and has not been painted.
The Tranny goes into reverse and rolls backwards at just a hair bit of gas, but if you try to back up quick it slips out. I have a rebuilt 700r4 with a 3600 stall i could throw in for 300$
When i got it, it wasn't running very well due to tuning issues. I put some larger injectors and got a reflash and the thing runs like a raped ape. New plugs were also a +++.
I would like 4,300$ like it sits or 4,600$ with the extra tranny.
Also would be VERY interested in a more streetable car. Maybe some bolt ons, Preferabbly a 6 Speed.
I have an engine pic on this link...









Last edited by 95 Civic; Dec 14, 2008 at 07:53 PM.
Car lost oil pressure as i was sitting in a shell station after just fueling it up. I was resetting my trip and watched it drop. Instantly shut the engine off and towed her home.
I had the oil pump replaced about a week or so before and the guy DID NOT CORRECTLY REATTACH THE PICKUP TUBE...
they have a common problem of falling off and I'm assuming thats what happened and starved my pump. Like is said, the car was not ran for my than 1 sec with no oil pressure.
I just need something to get me from point a to point b quicklike. This was my weekend warrior and my bike was my main mode of transportation...got cold quick.
I had the oil pump replaced about a week or so before and the guy DID NOT CORRECTLY REATTACH THE PICKUP TUBE...
they have a common problem of falling off and I'm assuming thats what happened and starved my pump. Like is said, the car was not ran for my than 1 sec with no oil pressure.
I just need something to get me from point a to point b quicklike. This was my weekend warrior and my bike was my main mode of transportation...got cold quick.
Thread
Thread Starter
Forum
Replies
Last Post
sleeperZ96BT
Parts For Sale
5
Sep 9, 2015 08:28 AM



