93 Camaro Z28 Hardtop Shell (Great Drag Project)
Thread Starter
Registered User
Joined: Mar 2003
Posts: 1,876
From: Maryland
93 Camaro Z28 Hardtop Shell (Great Drag Project)
Not sure if anybody on here is interested in a shell for a project.
1993 Camaro Z28 Hardtop
Non rolling. Thought it would be a great start for a drag race project, but bought the vette awhile back so no real point to have this.
Would need the following body panels to be a complete car :
Hood
Driver Side Fender
Front Bumper Cover - (I have one but it has a crack in it)
Berger Panel
(Could very easily turn this into an LS1 style car if thats what you like)
Nothing wrong with frame, car wasn't in an accident, I took some of the body panels off for an LS6 intake.
Interior has been stripped, car is pretty much gutted, weighs next to nothing.
Short list of what the car has:
Frame, both quarter panels, both doors, with windows and window motors and everything in doors, roof, windshield, rear bumper. Still has the front wiring harness, gas tank, fuel lines, fuel pump.
I have a bunch of parts in my parting out thread on this forum if you need anything else I have to go along with it that can be arranged.
Have the stock driveshaft and most of the front suspension but is out of the car, figured tubular k-member would be wanted anyways.
1993 Camaro Z28 Hardtop
Non rolling. Thought it would be a great start for a drag race project, but bought the vette awhile back so no real point to have this.
Would need the following body panels to be a complete car :
Hood
Driver Side Fender
Front Bumper Cover - (I have one but it has a crack in it)
Berger Panel
(Could very easily turn this into an LS1 style car if thats what you like)
Nothing wrong with frame, car wasn't in an accident, I took some of the body panels off for an LS6 intake.
Interior has been stripped, car is pretty much gutted, weighs next to nothing.
Short list of what the car has:
Frame, both quarter panels, both doors, with windows and window motors and everything in doors, roof, windshield, rear bumper. Still has the front wiring harness, gas tank, fuel lines, fuel pump.
I have a bunch of parts in my parting out thread on this forum if you need anything else I have to go along with it that can be arranged.
Have the stock driveshaft and most of the front suspension but is out of the car, figured tubular k-member would be wanted anyways.
Thread
Thread Starter
Forum
Replies
Last Post
Brandon Wittmer
General 1967-2002 F-Body Tech
3
Dec 3, 2014 09:28 PM
grendal
Site Help and Suggestions
28
Apr 15, 2010 05:20 PM
sleeperZ96BT
LT1 Based Engine Tech
300
Jun 5, 2005 09:33 PM
carcrazyQT
Site Help and Suggestions
15
Sep 17, 2002 07:54 AM