88 Mustang, LX black with red interior,WELD Draglites,

This car is very streetable. It's a pump gas 306, The engine has a Saleen intake, 24# injectors, Cobra mass air meter, 70mm accufab throttle body, Edelbrock Aluminum Performer 5.0 heads with light amount of port work, Lock wire head gaskets, Roller rockers, Lunati Hydraulic roller camshaft 230/240 @.05 with around .520 lift,Light weight TRW pistons, Stock block, Crank and rods, Mac long tube headers. Can get around 15mpg if taken it easy on it.

Trans: Tremec 3550, Lakewood bellhousing, Spec Aluminum flywheel, Spec stage 3 clutch, Hpm Cross member, Aluminum drive shaft.

Rear Axle: 8.8 with 31 spline Moser axles, 31 spline limited slip, 3.73 ring and pinion.

Suspension:Front- UPR tubular K-member, UPR tubular A-arms, UPR caster camber plates, UPR coil over kit, Lakewood 90/10 struts.QA1 coil springs.

Suspension:Rear- Hpm Mega bite JR. lower control arms, Eldebrock double adjustable uper control arms, Lakewood rear shocks, Hpm sub frame connectors, CCM Fabricated 3/16" steel Torque boxes.

Car 1/4 best ET 11.32 @124 and best 60' 1.49 on spray
12.70 with a 1.69 60 on motor

I drove this car on two legs of the Hot Rod Power Tour last year without any problems.


$8,000obo.

 

to the top

 

to the top

 

6800

 

to the top

 

6500 need this thing gone

 

sale pending

 

to the top

 

sale pending

 

Sold