Own a piece of history

This Camaro is the first LT1 to run an 8 second 1/4 mile pass.
Featured May2003 GM High Tech Performance .

1996 Z28 Camaro with 98-02 frontend conversion using all Gm parts and Glastek 4inch cowl hood and ss spoiler.Mystic teal with custom purple ghost flames.

Complete Billingsley Racing chassis and suspension.

Billingsley 9 inch rearend narrowed 3 inches per side
3.90 gear 40 spline gundrilled pocketmilled axles, lightweight spool.

Madman Racing manual rack and manual brake conversion.

Mark Williams Racing Disc brakes front/rear.

Weld Drag Magnum 15x10 with MT ET Drag 29.5x10.5 rear
Weld Drag Magnum 15x3.5 one piece with Goodyear 26x4.5 front runners

Afco Dbl adjustable shocks front /rear

Billingsley single wheel wheelie bar

Stroud parachute

Rossler turbo 400 rev manual valvebody, transbrake

JW Ultrabell

Turbo Action Cheetah shifter

TCT 9 inch 5000 rpm stall

Mark Williams chromoly driveshaft

383 LT1 4 bolt mains
Callies 3.750 stroke Racemaster crank
Oliver Billet 5.7 rods
JE -31 cc dish pistons coated by Polydyne
Custom Billet Hyd camshaft
Comp R hyd. lifters
DRE 1.7 shaftmount rockers
AFR rev kit
AFR LT4 220 cc heads completlyported by GTP
2.080int. 1.600ex.
Flow#'s to serious buyers
Chambers/intake & exhaust ports coated by Polydyne
Edlebrock Super victor intake
EFI conversion by Bauer Racing Engines with Carbon Fiber lifter valley hand ported by GTP
Wilson racing 90* elbow with Accufab 105 mm throttlebody
MSD 7al3 ignition
MSD cranktrigger with MSD 8570 small base Distributor
MSD power pro coil
MSD adjustable 2 step module
custom cam sync sensor setup
Moroso advanced designed 4 vane Vacuum pump
Ati superdamper
1 7/8 Hedmann longtube headers 3 1/2 collector
Straightline Performance Ultralite mufflers with turndowns

Vortech Ysi supercharger with custom brackets and tensioner
ASP cog pulleys
Griffin Frontmount air/air intercooler with 3.5 inch aluminium ductwork.
Vortech Super mondo bypass valve.

custom Speed Inc.8 gallon fuel cell
Weldon 2035 fuelpump
Weldon Dialaflow unit
Aeromotive adjustable regulator
Custom fuelrails
160 lbs.injectors
All braided stainless fuel lines

2 Kirkey racing seats
Speed inc. lightweight carpet
Autometer Ultra lite gauges Speedo,Fuel pressure,Boost,Vacuum,Fuel level
Stroud window net
Moroso battery box /Optima redtop battery

FAST ECM sequential wideband with Fast datalogger unit.

I have spent WAY to much time and money the last 9 yearson this car and now it is time to go .

This is a PROVEN 8 second car.

Will also include 2000 Haulmark 20 ft enclosed trailer with custom MAC tiedowns and PitPal ramp extensions .

Those of you that are building such a setup know how much this would cost to reproduce . Iam asking $40k and have spent WAY more than that to build this car. Thanks for looking Chris

Can deliver.
__________________
First LT1 in the 8's

--------------------------------------------------------------------------------
Last edited by Z8'S : Today at 06:51 PM. Reason: spelling

 

back to the top

 

once again to the top

 

TTT again.

 

anyone?

 

I'm sure people would like to see pics of this beast

 

yeah no pics no sale lol

here is the cover still got it in the thrown room



here is a 8.97 pass

http://www.unrealhp.com/NvsS/NvS10.wmv

 

Man sweet run!