trackbird

For Sale:



2002 Camaro Z-28 - Black w/Charcoal leather.

Leather
T-tops
Power locks
Power seat
Power windows
Rear defrost
Factory power steering cooler
Tilt
Cruise
6 speed
Monsoon w/in dash CD and 12 disc changer
Traction control
Keyless entry/alarm
T-top shade inserts
63,000 miles (5k oil changes with Mobile 1)
Transmission and rear axle fluids have been serviced as well.


....loaded (everything but SS and automatic)

Plus, it has the following:

Koni DA's on all corners (the rears were just shortened and rebuilt over the winter)
H&R Stage II front springs (600 in lbs)
Ground control adjusters w/150 in lb rear springs
35mm front sway bar
22mm rear hollow "strano" bar
Welded SLP SFC's
BMR STB
Trackbird's aluminum Rod/Rod PHB
6 Piston Wilwood front brakes with HP+ pads & 13" rotors
Lingenfelter 3.5" aluminum driveshaft
CAGS has been deleted in the PCM/Top speed limiter changed to 255 mph
B&M Ripper shifter with Hurst 6 speed ball
Ported throttle body (polished externally with a black powdercoated throttle arm)
Graphite color 10 spoke SS rims
K&N air filter
SLP TCS "defeat" module (turns off the TCS when you start the car)
Long GM performance parts rear wheel studs installed in rear
Spare set of almost new front floor mats
Trailer hitch for 93-02 Camaro/Firebird w/wiring harness

$18,500 - OBO (KBB retail is $17,125 on it with the current mileage and there is at least $3k in mods at used prices on there)

I also have the following extra parts (available at extra cost, not currently installed, or these could be available at an additional cost with the car).
Metco driveshaft loop (used, good condition)
10 spoke SS 17x9" rims (mint) with used (dead) Nitto 555RII's on them (set of 4).
17x9.5 Corvette (C4) "Sawblades" (like 1996 Corvette rims) good for track wheels (chips/scratches)
4 steel (V6 Camaro) rims with 16" snow tires (lots of tread left, nearly new condition)
Global west tubular upper front control arms with Del-a-lum bushings (used, very good condition)
Stock throttle body
MSD plug wires (new in box)
Spare set of used front hubs
GM performance parts "long" wheel studs
2 packs (10) ARP wheel studs
Front wheel spacers (billet aluminum/anodized black) for 17x11's
Bel FX2 Performance ("G") Meter with the optional computer software (used only a few times, excellent condition).

I guess I'm still pondering a 3rd gen/truck combo.

trackbirdengineering@columbus.rr.com