1995 z28 for sale road race car
07-05-2010, 07:38 PM
#1
Registered User
Thread Starter
Join Date: Jan 2004
Posts: 241
1995 z28 for sale road race car
1995 Camaro track car for sale. This is a great HPDE/Time Trial car (NASA TTA) or could even work out as a drag car with some adjustments. This car would probably run high 11’s on the strip. Times at race tracks-Road Atlanta 1:38, VIR 2:10 subtract about 4 seconds equiped with new Hoosier A’s. I bought this car new in 1995.
This car has some damage on the front nose cover where I backed my trailer hitch into it. Also note the RF quarter is cracked from hitting the garage, the right rear tail light is also damaged. The car has never been wrecked on Track.
This car could be driven on the street, but is not legal in the metro Atlanta area due to emissions. (no cats, big cam.)
Reason for sale-I bought a new T1 vette racecar.
******Asking Price $6500 ***********************
Contact me @ tim.marcinek@gmail.com for more info.
Pics located here
http://www.timz06.com/camarosale/
Parts on car and approximate cost
Engine
383 golen forged shortblock with splayed billet mains built for 7k rpm 4000
Canton road race pan 242T 300
Accusump 3qt 300
Heads ported by Lloyed Elliott LE2 1800
Cam by Bret Bauer (LE4) 240/240 .565 on 108 LSA 500
Hooker long tube headers 700
New opti with MSD cap & rotor 300
30 lb injectors 250
Walbro 255 lph fuel pump 250
Engine makes approx 435 hp to the wheels
air - air engine oil cooler 300
Mcleod street twin clutch 1100
58 mm throttle body 400
Turn one power steering pump 300
Brakes & Wheels
Corvette C5 (z06) brakes front 600
Stock rear
With spacers 17 x 11 wheels with 315 tires on all 4 corners corvette grand sport
Suspension
Front Global west upper control arms with spherical bearings 300
Front 1LE lowers with sperichal bearings 250
Front Ground control coil overs with 600 # springs Koni SA shocks 1200
32 mm solid sway from Strano 250
Rear - global west control arms with spherical bearings 200
Ground control weight jacks with 175 # springs
Stock rear sway bar
BMR torque arm 200
BMR transmission cross member 200
Misc
Sparco seats
Autopower roll bar 500
CATS engine tuning software
Total 14200
This car has some damage on the front nose cover where I backed my trailer hitch into it. Also note the RF quarter is cracked from hitting the garage, the right rear tail light is also damaged. The car has never been wrecked on Track.
This car could be driven on the street, but is not legal in the metro Atlanta area due to emissions. (no cats, big cam.)
Reason for sale-I bought a new T1 vette racecar.
******Asking Price $6500 ***********************
Contact me @ tim.marcinek@gmail.com for more info.
Pics located here
http://www.timz06.com/camarosale/
Parts on car and approximate cost
Engine
383 golen forged shortblock with splayed billet mains built for 7k rpm 4000
Canton road race pan 242T 300
Accusump 3qt 300
Heads ported by Lloyed Elliott LE2 1800
Cam by Bret Bauer (LE4) 240/240 .565 on 108 LSA 500
Hooker long tube headers 700
New opti with MSD cap & rotor 300
30 lb injectors 250
Walbro 255 lph fuel pump 250
Engine makes approx 435 hp to the wheels
air - air engine oil cooler 300
Mcleod street twin clutch 1100
58 mm throttle body 400
Turn one power steering pump 300
Brakes & Wheels
Corvette C5 (z06) brakes front 600
Stock rear
With spacers 17 x 11 wheels with 315 tires on all 4 corners corvette grand sport
Suspension
Front Global west upper control arms with spherical bearings 300
Front 1LE lowers with sperichal bearings 250
Front Ground control coil overs with 600 # springs Koni SA shocks 1200
32 mm solid sway from Strano 250
Rear - global west control arms with spherical bearings 200
Ground control weight jacks with 175 # springs
Stock rear sway bar
BMR torque arm 200
BMR transmission cross member 200
Misc
Sparco seats
Autopower roll bar 500
CATS engine tuning software
Total 14200
Thread
Thread Starter
Forum
Replies
Last Post
Garcia5
General 1967-2002 F-Body Tech
15
07-07-2022 06:51 PM