1994 Camaro roller 3,000 obo
Thread Starter
Registered User
Joined: Oct 2002
Posts: 653
From: Toledo, ohio
1994 Camaro roller 2000 obo NEW PRICE MUST SELL
I'm posting this for a friend. It's a 1994 Camaro set up for a SBC chevy. He's done the following
1. PA K-member (small block) stock racknpinion
2. SPOHN upper and lower a-arms with new ball joints
3. JEGSTER 6-point roll cage (hammer tone finish)
4. KYB adjustable front stuts
5. summit lowering springs (4)
6. new fuel tank,lines and pump
7. 3 gauge a post pod
8. rear vented rotors
9. BMR rear control arms and pan hard bar.
10. SBC 400 HP with turbo 350 tranny
doors, jams, floor and engine bay already painted white. under body sandblasted and wire wheeled painted black. spindles,hubs, brake componates sandblasted and painted.
no hood or bumpers everything else i have including all interior. If you have any questions please e-mail me or call Troy @ 419-705-4687
1. PA K-member (small block) stock racknpinion
2. SPOHN upper and lower a-arms with new ball joints
3. JEGSTER 6-point roll cage (hammer tone finish)
4. KYB adjustable front stuts
5. summit lowering springs (4)
6. new fuel tank,lines and pump
7. 3 gauge a post pod
8. rear vented rotors
9. BMR rear control arms and pan hard bar.
10. SBC 400 HP with turbo 350 tranny
doors, jams, floor and engine bay already painted white. under body sandblasted and wire wheeled painted black. spindles,hubs, brake componates sandblasted and painted.
no hood or bumpers everything else i have including all interior. If you have any questions please e-mail me or call Troy @ 419-705-4687
Last edited by chevy1963; Apr 26, 2007 at 05:54 PM. Reason: add info
Thread
Thread Starter
Forum
Replies
Last Post
