1979 Z28 f/s
02-19-2005, 02:00 PM
#1
Registered User
Thread Starter
Join Date: Feb 2005
Location: dover de
Posts: 21
1979 Z28 f/s
1979 Z28 camaro with the following for sale in dover de (19901)
well, i am selling my toy, it is for sale locally also, so keep that in mind...i have to build an LT1 for my main toy, mine is going to go boom soon! lol
prefer local pick up, but will ship if arranged and paid for by buyer.
355 ci.i 4 bolt:
hyper pistons
rebuilt rods
crank i believe is a scat 9000, could be wrong...
trick flow twisted wedge heads
-2.02int 1.6 exh (other specs on request)
edelbrock performer rpm intake
holley 750 cfm vac secondary
Long tubes (fairly new, but nothing special)
Trans is a th350
(need to pull pan and change spring on park powl)
push botton start !!no keys!!
trans has been 10s, well built
not sure when the rear was done, but its an 8 1/2 in 10 bolt
w/ 3.42 gears
15 inch welds all the way around
(4 1/2 inch front w/ MT tires)
(11.5 out back with M/T ET streets (28x11.5))
power seats from ?94? Z28
back seats removed (avail)
new carpet (few years ago)
have alot of parts that would go along with it too, blown th350, dash cover, gauges, full flow master exhaust, ect ect... car is fast, but could definately be faster with a few things done to it..
before the motor in my formula started to go, i was about 2 days away from throwing a 250 shot on it and pounding some concrete!
needs to be finished, body is clean, other than two or three fixible blems on the factory Z hood (ram air style) car is "primer" black and a good paint job would definately do it good (can get good "gunmetal" paint for you cheap if interested... the car is definately worth more than what i am asking...
4,000 obo takes it...
it has to go, so, any reasonable offers will be concidered.
and remember its for sale locally too, so, it might not be here long.
chris... email me at fast4038a@yahoo.com or you can call me @ 302-222-4726. thanks
well, i am selling my toy, it is for sale locally also, so keep that in mind...i have to build an LT1 for my main toy, mine is going to go boom soon! lol
prefer local pick up, but will ship if arranged and paid for by buyer.
355 ci.i 4 bolt:
hyper pistons
rebuilt rods
crank i believe is a scat 9000, could be wrong...
trick flow twisted wedge heads
-2.02int 1.6 exh (other specs on request)
edelbrock performer rpm intake
holley 750 cfm vac secondary
Long tubes (fairly new, but nothing special)
Trans is a th350
(need to pull pan and change spring on park powl)
push botton start !!no keys!!
trans has been 10s, well built
not sure when the rear was done, but its an 8 1/2 in 10 bolt
w/ 3.42 gears
15 inch welds all the way around
(4 1/2 inch front w/ MT tires)
(11.5 out back with M/T ET streets (28x11.5))
power seats from ?94? Z28
back seats removed (avail)
new carpet (few years ago)
have alot of parts that would go along with it too, blown th350, dash cover, gauges, full flow master exhaust, ect ect... car is fast, but could definately be faster with a few things done to it..
before the motor in my formula started to go, i was about 2 days away from throwing a 250 shot on it and pounding some concrete!
needs to be finished, body is clean, other than two or three fixible blems on the factory Z hood (ram air style) car is "primer" black and a good paint job would definately do it good (can get good "gunmetal" paint for you cheap if interested... the car is definately worth more than what i am asking...
4,000 obo takes it...
it has to go, so, any reasonable offers will be concidered.
and remember its for sale locally too, so, it might not be here long.
chris... email me at fast4038a@yahoo.com or you can call me @ 302-222-4726. thanks
Last edited by marlboroman82; 02-19-2005 at 03:08 PM. Reason: type o
02-20-2005, 07:54 PM
#6
Registered User
Thread Starter
Join Date: Feb 2005
Location: dover de
Posts: 21
Re: 1979 Z28 f/s pics inside!
79 Z-28 #1
79 Z-28 #2
only two pics that i have at the moment. can take more upon request...
thanks,
chris
79 Z-28 #2
only two pics that i have at the moment. can take more upon request...
thanks,
chris
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
LT1 Based Engine Tech
2
01-05-2015 07:14 PM
MIGHTYMOUSE
Car Audio and Electronics
5
08-29-2002 09:18 AM
formula79
Car Audio and Electronics
3
08-06-2002 11:18 AM