Removing stock cd player
Thread Starter
Registered User
Joined: Nov 2002
Posts: 1,201
From: Somewhere between a shotgun barrel, and a blood spatter on the wall.
Removing stock cd player
i have the stock delco cd player in my 95' formula with the 10 speaker system...
a member of the board wants to buy it, but its still in the car and i can't figure out how the **** to get it without breaking/hurting stuff.
if someone could help me out with some directions here, i would be eternally grateful
Thanks so much!
Jared
a member of the board wants to buy it, but its still in the car and i can't figure out how the **** to get it without breaking/hurting stuff.
if someone could help me out with some directions here, i would be eternally grateful
Thanks so much!
Jared
1. Remove knee bolster under steering wheel. Its 2 screws and 2 7mm bolt.
2. Behind knee bolster you'll see the 2 7mm bolts on the left side of the radio trim. Remove them.
3. Open glove box door and remove the 3 7mm bolts.
Trim should now come out.
4. Radio is held in with 2 7mm on the left side and a single 10 mm nut on the right side.
2. Behind knee bolster you'll see the 2 7mm bolts on the left side of the radio trim. Remove them.
3. Open glove box door and remove the 3 7mm bolts.
Trim should now come out.
4. Radio is held in with 2 7mm on the left side and a single 10 mm nut on the right side.
Thread
Thread Starter
Forum
Replies
Last Post
CobraEatr
Car Audio and Electronics
3
Jul 22, 2002 09:49 AM



