So i just got subs, box and an amp.

Subs- 2 rockford 10 punchs
amp- jensen 300watt 2-ch bridgeable XA2150

I was wunder what else i would need to hook them up.(wires, screws ect) Just want to make sure i have everything so when my friend comes over i dont have to go get everything

I figured i would need wires to connect them all but idk where to get them.. Friend said i could get them at walmart??

ALso was wundering how hard they are subs to hook up any sites with pics ect? Got a friend coming over to hook them up but i was thinking about trying my self, or is there a way that i can test them to see how they will sounds. As you can tell i hardly know anything about audio, but any replies will greatly appreciated.

 

you are gonna need a amp installation kit which includes power w/ inline fuse holder and ground cable, a remote turn on wire, rca cables and speaker wire. you could probably get it at walmart but thats probably for a generic set of wires. If you can atleast get the rockford amp install kit. To me the hardest part is going through the firewall if you dont have a pre-cut hole with a grommet over it. Run your power and remote wire down one side of the car and your RCA cables down the other to eliminate any possibility for any engine noise.