I got my receiver out of a 94'TA tp put in my 95'TA. I was told that all 94+ TA's were pre-wired for keyless entry. I removed my pass. kick panel and none of the connectors fit the receiver. Can anyone tell me how to install the factory receiver?

 

Please Help Me!!!

 

The receivers are the same for 1994-1995, but if you don't have the connectors to plug it in, I don't see how it is going to work. I don't know anything about the non keyless entry cars being wired for keyless entry.

 

Do you have power locks now??
If I remember correctly, I think one of the connecters are plugged into something else. You have to unplug it to plug into the control box. It's the square one located in the pass. kick panel. It's part of the wiring harness that runs from door to door. It plugs into any car. Doesn't matter if it came with power or not.

My car originally had no power anything, but my friend wrecked his 97TA and I used all of his parts, except for the keyless entry modual. He sent the car to the junkyard before I realized I forgot it in the car!! UUURRRGGGHHH.

RYAN

 

Yes, I have power everything, but the connectors in the pass. kick panel are all to big to fit the receiver. Im lost on this install.

 

What about if someone with factory keyless entry on a 94-95 can just tell me which color wires connect and where on the receiver. That way I can just solder them and wont need the connectors. Pictures would really help.