Feeding wire from engine battery to int of car

Subscribe
May 30, 2003 | 10:20 AM
  #1  
Hi everyone.

I have installed a streetglow gold series underneath my car successfully. The only problem is, I need to feed the switch through my car into its interior. I have something rigged right now, but it's too embarrasing to describe.

So, can someone please suggest the best way to send the wires (switch) into the interior, I do not want to drill into the firewall.

Thanks
Pure
Reply
May 30, 2003 | 01:10 PM
  #2  
Remove the two 10mm bolts that hold the PCM in (located at the top left of the engine bay when looking at the engine from the front of the car) and you'll see a large grommet behind it that you can run wires through.
Reply
May 30, 2003 | 11:38 PM
  #3  
yup, that's where I ran my wire for my underbody neon
Reply
Aug 2, 2003 | 08:34 AM
  #4  
Just an FYI...

Pure is an imposter. He is from Ontario Canada and is impersonating one of our members..

Check out this post:

http://web.camaross.com/forums/show...threadid=150777

I'm going to post this to every thread Pure starts until he removes the bogus references to Nashville and stops pretending to be a member of our club.

Personally I would not trust the guy. He apparently has no qualms about pretending to be someone he's not.

He came on our website and pretended to be a 17 yr old kid from TN who was caring for his invalid Grandmother. Talk about low.... His Ontario IP addy gave him away.
Reply
Aug 2, 2003 | 09:20 AM
  #5  
http://web.camaross.com/forums/showt...hreadid=150777

I am Anti-Canada and not affraid to say so
Reply
Aug 2, 2003 | 11:47 AM
  #6  
Quote:
Originally posted by RCJim


I am Anti-Canada and not affraid to say so
That's ok, we don't want anyone that doesn't know the difference between dual and duel in our country anyway. Ignorant bastard. I hope you realize that you just did exactly what Pure did in the post Chris 96 WS6 is refering to. Now go take a long walk on a short pier.
Reply
Aug 2, 2003 | 11:52 AM
  #7  
LOL.....


but yeah...to answer the question...just look around from inside the car to find all those rubber grommets that breach the firewall. I used the one behind the PCM too....probably the best location.
Reply
Aug 2, 2003 | 11:57 AM
  #8  
BTW, just because his IP originates from Ontario canada doesn't mean he's in Ontario. He could be anywhere just going through an Ontario proxy server.
Reply
Aug 2, 2003 | 12:05 PM
  #9  
x7x7....VERY VERY good point.
Reply
Aug 3, 2003 | 04:57 AM
  #10  
Where he is is not the main issue he has told other members of this board false info to make them believe his false sig. and has even gone as far as to invite them to meetings he knows nothing about.
Reply
Aug 6, 2003 | 03:15 PM
  #11  
I'm with you guys, I don't like them either, remember I lived there for a short time, the women where hot, the cars were great and so was the culture, but the rest sucked!

Remember they gave us Celine Dion!





Don't forget to check my sig!


Pure


BTW I have no idea what this server stuff means, but it sounds cool!
Reply
Subscribe