Automotive News / Industry / Future Vehicle Discussion Automotive news and discussion about upcoming vehicles

Need Vibe matrix info..build, assembly and what nots....

Thread Tools
 
Search this Thread
 
Old 08-28-2006, 04:58 PM
  #1  
Registered User
Thread Starter
 
Caps94ZODG's Avatar
 
Join Date: Apr 2000
Location: New England
Posts: 3,749
Need Vibe matrix info..build, assembly and what nots....

Hey guys need some info on the Matrix and Vibe...

read a post about this person test driving the cars and said the Pontiac has GM's problems of fit and finish and built quality.
So my questions are..and have looked but its saying GM or toyota for both..

Interior..who designed it Pontiac or Toyota?

Interior peices...who is the supplier? Toyota or GM?

I know the build is in Cali an dthe Matrix is in Canada..but if so what else is built along side the Vibe?

I want to tell him its perceived quality and they are both built about the same..its like saying the Camaro and the Firbird were built better than the other?? am I far off?? or is this person right?
Caps94ZODG is offline  
Old 08-28-2006, 05:32 PM
  #2  
Registered User
 
guionM's Avatar
 
Join Date: Mar 2001
Location: The Golden State
Posts: 13,711
Re: Need Vibe matrix info..build, assembly and what nots....

Vibe, Matrix, and the Volt (the Pontiac Vibe that's exported to Japan) are all made nearby in Fremont California (in the San Francisco Bay area).

As you'd probally expect, they both actually do have the same build quality. Of course, perception being everything, Toyota's probally going to be ranked higher.

I believe there was a joint effort in making the things.

I remember Scott once saying the Vibe had one of the lowest quality scores of any current GM product. I was surprised he said that because I actually like them.
guionM is offline  
Old 08-28-2006, 11:51 PM
  #3  
Registered User
 
Supergrobo82's Avatar
 
Join Date: Mar 2005
Location: MA
Posts: 194
Re: Need Vibe matrix info..build, assembly and what nots....

Yeah I'm kind of surprised about that quality score too, I never see them in the shop, everyone I know that has one loves it. It's a good little car that has been hot recently with gas crunch.
Supergrobo82 is offline  
Old 08-29-2006, 07:20 AM
  #4  
Registered User
 
ol'93formula's Avatar
 
Join Date: Feb 2001
Location: West Middlesex, pa, usa
Posts: 82
Re: Need Vibe matrix info..build, assembly and what nots....

Originally Posted by guionM
Vibe, Matrix, and the Volt (the Pontiac Vibe that's exported to Japan) are all made nearby in Fremont California (in the San Francisco Bay area).
Are you sure about that? Isn't the Matrix made at a plant in Canada?

Looking at the nummi.com page they claim Vibe, Corolla and Tacoma.
ol'93formula is offline  
Old 08-29-2006, 08:00 AM
  #5  
Registered User
 
Jason E's Avatar
 
Join Date: Mar 2001
Location: Sarasota FL
Posts: 3,375
Re: Need Vibe matrix info..build, assembly and what nots....

The Vibe is almost entirely a Toyota effort...the only thing GM inside the car is the radio! And even then, I remember some a**hole who wrote in regarding Automobile's long-term test of an '03 Matrix...he claimed that the "crappy GM radio" should be banished from the car!

Have you SEEN a Toyota radio? Most use friggen LCD screens that don't even allow you to wear polarized sunglasses! Leave it to some a**hole to unnecessarily bash the one obvious GM part in the car...

And yes, I was with Guy when Scott made that comment And yes, I still hate the GD Vibe...
Jason E is offline  
Old 08-29-2006, 12:56 PM
  #6  
Registered User
 
guionM's Avatar
 
Join Date: Mar 2001
Location: The Golden State
Posts: 13,711
Re: Need Vibe matrix info..build, assembly and what nots....

Originally Posted by ol'93formula
Are you sure about that? Isn't the Matrix made at a plant in Canada?

Looking at the nummi.com page they claim Vibe, Corolla and Tacoma.
You're right. Cambridge, Ontario.

Old info.
guionM is offline  
Old 08-30-2006, 06:33 PM
  #7  
Registered User
 
Aklaim's Avatar
 
Join Date: Jan 2003
Location: San Jose, Ca
Posts: 602
Re: Need Vibe matrix info..build, assembly and what nots....

The Vibe is made in Fremont, CA at the NUMMI plant. They make the Corrola and Tacoma alongside the Vibe. Here's a link to the plant.... http://www.nummi.com/
Aklaim is offline  
Old 08-31-2006, 09:37 AM
  #8  
Disciple
 
poSSum's Avatar
 
Join Date: Nov 2000
Posts: 1,479
Re: Need Vibe matrix info..build, assembly and what nots....

Canadians just build better cars ... cough .... Oshawa ..... cough
poSSum is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Z Power
LT1 Based Engine Tech
8
09-19-2015 11:19 PM
Henson071
Parts For Sale
2
09-18-2015 04:01 PM
Str8hp
Parts Wanted
0
08-25-2015 06:03 PM
Dams76
General 1967-2002 F-Body Tech
3
08-20-2015 08:28 AM
warmeck
General 1967-2002 F-Body Tech
16
07-17-2015 01:36 PM



Quick Reply: Need Vibe matrix info..build, assembly and what nots....



All times are GMT -5. The time now is 01:33 PM.