Could someone please advise me what camber, caster and toe in I should set the car after installing Eibach Pro Kit on a 1999 Z28.

The car will also have Bilstein HD's, run on 16" rims and be mainly used for the street.

Thanks in advance for your help.

Richard

 

Max caster, -1.0 to -1.5º camber, or greater if you want/can. Zero toe, or toe out 1/16", I went with zero but regretted it (car pushes).

 

What is the maxumium amount of caster available on our cars. Also, with -1.5 camber, will the tires wear abnormally? I currently run -1, but would like more!

------------------
1993 red M6 Z28; custom control arms; bushings; strut bar; Eibach Pro-kit;17x9.5" OZ Monte Carlo & Bridgestone RE71 275 tires; Mac exhaust; K&N cold air; airfoil; TB bypass; 3.73 gears; KVR pads & rotors; -1 camber alignment

 

You can get about 3.5 degrees of caster, maybe a touch more. If your tires are wearing even with -1 camber, then sure, try -1.5, though it's pushing it for a street setup.

Dave

------------------
1997 LPE 383/n2o Camaro Z28 Convertible
12.39@112.2, 1.76 60' (na) 11.27@124.6, 1.76 60' (n2o)
LT1 Diagnostics, New to Nitrous? Northern California Racing Club

 

Like Dave said, I got around 3.5 caster. Stock ride height cars I believe can get around 4.5, most people just flat max it out, whatever they can get (maybe not most people, but many prefer it).