Technique for applying racing stripes?
Thread Starter
Banned
Joined: Mar 2003
Posts: 1,029
From: NJ
Technique for applying racing stripes?
I will, probably, be putting 2 vinyl racing stripes (8" each) on my Daytona and was just wondering what the best install technique to get them to stick correctly and last 
Last edited by SloMofo; Jun 4, 2003 at 11:54 AM.
Registered User
Joined: Apr 2003
Posts: 563
From: Z
Put 10 drops of dish soap in a quart of water. Sprays tons and tons of it on the decal as you are putting it on. Use tape to align the stripes. If you have any bubbles, do not rub them. Instead, poke a tiny hole on top and roll the air or water out. Hope this helps.
Thread Starter
Banned
Joined: Mar 2003
Posts: 1,029
From: NJ
Originally posted by Schismblade
Put 10 drops of dish soap in a quart of water. Sprays tons and tons of it on the decal as you are putting it on. Use tape to align the stripes. If you have any bubbles, do not rub them. Instead, poke a tiny hole on top and roll the air or water out. Hope this helps.
Put 10 drops of dish soap in a quart of water. Sprays tons and tons of it on the decal as you are putting it on. Use tape to align the stripes. If you have any bubbles, do not rub them. Instead, poke a tiny hole on top and roll the air or water out. Hope this helps.
Thread
Thread Starter
Forum
Replies
Last Post
whitehooptie
General 1967-2002 F-Body Tech
15
Jul 12, 2015 06:10 PM
Doug Harden
Automotive News / Industry / Future Vehicle Discussion
29
Jul 30, 2003 07:05 AM