Show me photos of your OTVC wires ! !
Thread Starter
Registered User
Joined: Jan 2002
Posts: 3,007
From: USA
Show me photos of your OTVC wires ! !
Hey guys,
I would like to see some pics of your Over The Valve Cover wires routing, especially how you routed them to the opti.
However, any pictures at all would be helpful.
The more the better !
I would like to see some pics of your Over The Valve Cover wires routing, especially how you routed them to the opti.
However, any pictures at all would be helpful.
The more the better !
Registered User
Joined: Nov 2001
Posts: 3,515
From: Kansas
Originally posted by pu12en12g
Bump... I know more of you have these.
I need pics of show quality wire routing.
Bump... I know more of you have these.
I need pics of show quality wire routing.
sometimes purpose is more important than looks. usually if you route them to look pretty, they end up getting up against hot parts which eventually ruin the wires. ask me how i know
Registered User
Joined: Feb 2002
Posts: 960
here ya go, i gt my holders from summit, notice not evry wire holder was needed, using all of the holders-I think 5 was way overkill and to hard to hook up. With what I have they don't move, even if you tug on them. Look at the first page too since there are pictures of the entire engine, showing how they look and route. THe drivers side was easy the passenger side I had to route the wires next to the alternator braket and zip tied, there is just enough space to keep them tight so they don't move around and hit the serpintine belt
http://community.webshots.com/album/79485783kIzaYY/1
http://community.webshots.com/album/79485783kIzaYY/1
Last edited by D James; Sep 20, 2003 at 07:09 PM.
Thread Starter
Registered User
Joined: Jan 2002
Posts: 3,007
From: USA
Originally posted by turbo_Z
"show quality"
sometimes purpose is more important than looks. usually if you route them to look pretty, they end up getting up against hot parts which eventually ruin the wires. ask me how i know
"show quality"
sometimes purpose is more important than looks. usually if you route them to look pretty, they end up getting up against hot parts which eventually ruin the wires. ask me how i know
D James, I've never seen that setup before, it looks good.
Registered User
Joined: Dec 1969
Posts: 37
From: Wallingford, CT USA
Not the best quality pictures (by any stretch) and only
drivers side.
Not exactly over the covers, more like over the headers
On passenger side, I ran them from opti, between power streeting pump and the pump hard line, through acc bracket, under alternator. From that point back the 2 sides maintain symmetry.
LINK
drivers side.
Not exactly over the covers, more like over the headers
On passenger side, I ran them from opti, between power streeting pump and the pump hard line, through acc bracket, under alternator. From that point back the 2 sides maintain symmetry.
LINK
Registered User
Joined: Jul 2002
Posts: 440
From: Charelston, SC
http://photos.yahoo.com/bc/nikkev1/l...tos.yahoo.com/
Not very detailed pics but there are some pics of my OTVC wires
Not very detailed pics but there are some pics of my OTVC wires
Registered User
Joined: May 2002
Posts: 4,579
From: Cincinnati, OH
Thread
Thread Starter
Forum
Replies
Last Post
bonniew
Events and Cruise Spots
0
Jan 18, 2015 01:14 PM
Brandon Wittmer
General 1967-2002 F-Body Tech
3
Dec 3, 2014 09:28 PM
NewsBot
2010 - 2015 Camaro News, Sightings, Pictures, and Multimedia
0
Dec 3, 2014 12:30 PM