Shifter knobs?
#46
Re: Shifter *****?
Originally Posted by njenson
yea from what it looks like he (or the manufacturer) does do custom ones so either is an option. I'll tell on the quailty in a couple of days since i picked up the one in the picture.
Also, i went out and measured my stocker and they should be around the same size both around 2.25 in or so
Also, i went out and measured my stocker and they should be around the same size both around 2.25 in or so
I have been emailing them back and forth. I'll probably be getting one by them as well. The smallest they offer is a 2 1/8 ball, which I will probably get. Definatly let me know as soon as you get yours to let me know of the quality. Also make sure to post some pics!
#48
Re: Shifter *****?
got mine today. the peice looks great! exactly like the picture. id say its well worth the money. i havent put it on yet but id say its a fit from a look at the threads. it also appears to be a little bit smaller than the stocker
#50
Re: Shifter *****?
i got the regular it seems to be smaller than the stocker and probably small enough for me the little bit makes a difference. im gonna take a dye and tap down the threads on my short stick and maybe cut it to get it to a good height because it sits a little higher than the stock one
as for pictures i may be able to get some in a couple of days when i can get it done (i dont have a digital camera)
as for pictures i may be able to get some in a couple of days when i can get it done (i dont have a digital camera)
#51
Re: Shifter *****?
Got it all done and looks and feels great. cut off about 7/8 of an inch of thread and tapped down the threads quite a bit. got it all down to the point where you could barely stick a finger between the plastic and **** in 2nd. its great i didnt think id feel the difference in the throw but i do , nice and short
and yea still trying to get some pics
next thing ive been thinking about is boots but i am unsure of the color. any ideas for a dark green car with a tan/moca interior (pics on cardomain page)
and yea still trying to get some pics
next thing ive been thinking about is boots but i am unsure of the color. any ideas for a dark green car with a tan/moca interior (pics on cardomain page)
#52
Re: Shifter *****?
Originally Posted by njenson
Got it all done and looks and feels great. cut off about 7/8 of an inch of thread and tapped down the threads quite a bit. got it all down to the point where you could barely stick a finger between the plastic and **** in 2nd. its great i didnt think id feel the difference in the throw but i do , nice and short
and yea still trying to get some pics
next thing ive been thinking about is boots but i am unsure of the color. any ideas for a dark green car with a tan/moca interior (pics on cardomain page)
and yea still trying to get some pics
next thing ive been thinking about is boots but i am unsure of the color. any ideas for a dark green car with a tan/moca interior (pics on cardomain page)
#53
Re: Shifter *****?
Hey didnt see the site on here for the ball so i tracked it down. Its http://www.ripps70.com. There is a link for the shifter ***** on the website i just purchased one from him off of ebay.
Berly
Berly
#59
Re: Shifter *****?
The size I got was 2 1/8. I got really used to that size when I recieved that same size **** for my Formula shifter from MBA. Thanks for the comments. It took a while for me to find what I wanted (something custom and different looking while still keeping the ball shifter), but finally I am happy with what I chose. The company at first did screw up the order, and it took like a month, but they did eventually get it right, and I am very pleased with the finished product. I would reccomend them.
Thread
Thread Starter
Forum
Replies
Last Post
CARiD
Supporting Vendor Group Purchases and Sales
0
09-07-2015 08:21 AM