Post# 2 of the FREE Overlay Templates Mod....
07-19-2004, 10:32 AM
#76
Registered User
Join Date: Oct 1999
Location: Grandview,TN
Posts: 203
Re: Post# 2 of the FREE Overlay Templates Mod....
Can anyone make me up a set that will match these?
http://www.bfranker.badz28.com/fbody/overlay_hvac2.jpg
I tried, but my computer cant handle a picture of that size for some reason, it just keep locking up. I will pay someone, if they would make a overlay for me. thanks
charged96z@aol.com
http://www.bfranker.badz28.com/fbody/overlay_hvac2.jpg
I tried, but my computer cant handle a picture of that size for some reason, it just keep locking up. I will pay someone, if they would make a overlay for me. thanks
charged96z@aol.com
10-24-2004, 05:43 PM
#77
Registered User
Join Date: Oct 2003
Location: Georgetown, IL
Posts: 477
Re: Post# 2 of the FREE Overlay Templates Mod....
Why is this thread DEAD, still someone has yet to post a clear cut DIY Guide as to how to do this process...So if anyone who's good at it, can contact me with some tips, I would greatly appreciate it, and would do some work for people, since some of the request in this post has yet to be fullfilled....As for the 97+ TA Guages I could scan one probably since I have a 97 Cluster I picked up for cheap laying here.....Once again someone who's done this, and can give me a walk through please contact me thanks!
12-16-2004, 03:53 PM
#79
Registered User
Join Date: Oct 2003
Location: Georgetown, IL
Posts: 477
Re: Post# 2 of the FREE Overlay Templates Mod....
TransAmGT, good luck bro...I've PM'd guys from this thread (Viper) The originator of it, and he wont even reply, even though I see he read the PM from the reciept...I guess it's a lost cause...
12-16-2004, 07:31 PM
#81
Registered User
Join Date: Oct 2004
Posts: 186
Re: Post# 2 of the FREE Overlay Templates Mod....
Anybody care to chime in on the dimensions this thing needs to be and how to scale it down so i stop wasting high cost paper on trying to get it to scale? or better yet, someone post an image of an already scaled version?
Id appreciate it greatly,
Dave
Id appreciate it greatly,
Dave
12-16-2004, 07:47 PM
#82
Registered User
Join Date: Oct 2003
Location: Georgetown, IL
Posts: 477
Re: Post# 2 of the FREE Overlay Templates Mod....
S3gulit, good luck...but you can go to Brent Franker's page he has a few templates on there if you don't have his site IM me on AIM and I can give it to you...
12-17-2004, 11:13 AM
#84
Registered User
Join Date: Oct 2003
Location: Georgetown, IL
Posts: 477
Re: Post# 2 of the FREE Overlay Templates Mod....
Fast Orange, unfortunately in my eyes this thread should be deleted. I am the only one posting, and my original posts were FOREVER ago. All the "people" who say they could do them, I have PM'd with no response...Obviously they aren't to helpful if they posted they could do it in this thread, and wont help out, or even instruct. My guess as to going about this is Scanning your cluster, to scale, and editing it that way. However this is just a shot in the dark, as for no-one's offered me any guidance either. It'd be nice if someone would get together and just make a write up, and host different scans for people to use & pick from... 
12-17-2004, 11:26 AM
#85
Registered User
Join Date: Dec 2000
Location: sherman, tx
Posts: 273
Re: Post# 2 of the FREE Overlay Templates Mod....
well i would think you could just take the cluster to a reputable sticker/vinyl guy and he could scan it in and make it how you wanted it but i wouldnt think that you could see through the vinyl.. unless some one makes a transparent vinyl..or in my case of wanting it to match the auto meter ultra lights i could come up with a alternate light source which would still cause problems as far as abs, ses, and all other warning/indicator lights..
12-17-2004, 11:29 AM
#86
Registered User
Join Date: Oct 2003
Location: Georgetown, IL
Posts: 477
Re: Post# 2 of the FREE Overlay Templates Mod....
Yes, in the "Screen Printed" Vinyls though they start out with a clear sheet, and DYE it to color...So it could be layed out as to have clear areas for the dumby lights. However your local normal "Vinyl" guy wont do a screen print more than likely...
12-17-2004, 11:32 AM
#87
Registered User
Join Date: Dec 2000
Location: sherman, tx
Posts: 273
Re: Post# 2 of the FREE Overlay Templates Mod....
i will ask him if you think we could get enough orders.. obviously ppl want them.. i guess i will see how many orders we would have to get.. ill keep you updated..
02-20-2006, 10:40 AM
#89
Registered User
Join Date: Aug 2003
Location: Atlanta
Posts: 448
Re: Post# 2 of the FREE Overlay Templates Mod....
Originally Posted by Fast Orange
i will ask him if you think we could get enough orders.. obviously ppl want them.. i guess i will see how many orders we would have to get.. ill keep you updated..
