I need a STELLA Body Kit, Is it possible to get one these days?
08-24-2002, 10:54 AM
#1
Registered User
Thread Starter
Join Date: Oct 1999
Location: Holland, PA, USA
Posts: 32
I need a STELLA Body Kit, Is it possible to get one these days?
I really want this kit and only this kit, is there anyway you can still get one? How much do they run? Please let me know ASAP.
Mike
------------------
97'Z28 30th Aniversary Coup-M6(White With Orange Stripes)Pro Performance Stage 2 Heads(282/209@600Lift)Manley Valves(2.01/1.6) 987 CCValve Springs,Comp"R" Lifters,Chromoly Hardened Pushrods,7/16th 1.6 RR,Ported Intake(Orange),CC306,BBK 52mm TB,CSI Electric Water Pump,30LB SVO Injectors,Hurst Short Throw Shifter,Flowmaster Cat-Back,K@N FIPK,Persision 4:10 Gears/MAC girdle,Eaton Posi,Mac Underdrive Pullies,Coated Hooker LT's,IRS Y Pipe,3.5 Flowtech CutOut,HP Timing Chain,Talyor 8mm,NGK TR-6,MSD 6AL,SS Blaster Coil,O2 Sims,LT4 KM,ED Wright Custom Program/160Thermostat,Shift Light@5inch Tach,BMR SFC,STB,Lower Control Arms,Panhard Rod(All Orange)MAC Torque Arm, Eibach Drag Springs,!CATS,MAF Descreened,TB Bypass,!CAGS,1LE Tranny Mount(80-150 Nitrous Wet Shot,RPM Switch,Custom Dual Purge,Bottle Heater,Remote Opener)
Appearance: SS Chrome 17X11 Rims(315/35) Back and Nitto (275/40) Front),4 Inch Cowl Hood,3.5" Straight Chrome Tips,20% Tint,Phanton Nos,Fuel Pressure,Air Fuel Gauges,Chrome Custom Valve Covers,Hurst Nos Shift ****,RK Sport Orange Rear Lettering,(Near FUTURE MODS-Strange 12 Bolt,Denny's DS,Spec Stage 3 Ceramic Clutch,Hals Shocks,55 Inline FP)
Mike
------------------
97'Z28 30th Aniversary Coup-M6(White With Orange Stripes)Pro Performance Stage 2 Heads(282/209@600Lift)Manley Valves(2.01/1.6) 987 CCValve Springs,Comp"R" Lifters,Chromoly Hardened Pushrods,7/16th 1.6 RR,Ported Intake(Orange),CC306,BBK 52mm TB,CSI Electric Water Pump,30LB SVO Injectors,Hurst Short Throw Shifter,Flowmaster Cat-Back,K@N FIPK,Persision 4:10 Gears/MAC girdle,Eaton Posi,Mac Underdrive Pullies,Coated Hooker LT's,IRS Y Pipe,3.5 Flowtech CutOut,HP Timing Chain,Talyor 8mm,NGK TR-6,MSD 6AL,SS Blaster Coil,O2 Sims,LT4 KM,ED Wright Custom Program/160Thermostat,Shift Light@5inch Tach,BMR SFC,STB,Lower Control Arms,Panhard Rod(All Orange)MAC Torque Arm, Eibach Drag Springs,!CATS,MAF Descreened,TB Bypass,!CAGS,1LE Tranny Mount(80-150 Nitrous Wet Shot,RPM Switch,Custom Dual Purge,Bottle Heater,Remote Opener)
Appearance: SS Chrome 17X11 Rims(315/35) Back and Nitto (275/40) Front),4 Inch Cowl Hood,3.5" Straight Chrome Tips,20% Tint,Phanton Nos,Fuel Pressure,Air Fuel Gauges,Chrome Custom Valve Covers,Hurst Nos Shift ****,RK Sport Orange Rear Lettering,(Near FUTURE MODS-Strange 12 Bolt,Denny's DS,Spec Stage 3 Ceramic Clutch,Hals Shocks,55 Inline FP)
08-24-2002, 03:46 PM
#2
Registered User
Join Date: Aug 2000
Location: dartmouth mass
Posts: 1,507
look on ebay for vizage kit or something and do a search for japenese kit you'll find it but i am not sure if he has anymore.
http://cgi.ebay.com/ebaymotors/ws/eB...tem=1839689390
I wish you luck
------------------
95 Z28 M6 with slp coated headers,slp 2otl cat back, cross drilled rotors, deleted maf screens,airfoil,slp sub frames, slp 160 thermo., slp skip shift elim.,slp air temp. module, slp cold air intake, Lt4KM, comp cams gold 1.6 rr's,lt4 clutch and pressure, energy supspension tranny mount, flowtech cutout, Taylor 8 mm wires over the valve cover, bf goodrich dr's, new best 12.88 with a 1.97 60'
88 jetta winter beater
87 honda cbr 600 hurricane fun to blast around on
http://cgi.ebay.com/ebaymotors/ws/eB...tem=1839689390
I wish you luck
------------------
95 Z28 M6 with slp coated headers,slp 2otl cat back, cross drilled rotors, deleted maf screens,airfoil,slp sub frames, slp 160 thermo., slp skip shift elim.,slp air temp. module, slp cold air intake, Lt4KM, comp cams gold 1.6 rr's,lt4 clutch and pressure, energy supspension tranny mount, flowtech cutout, Taylor 8 mm wires over the valve cover, bf goodrich dr's, new best 12.88 with a 1.97 60'
88 jetta winter beater
87 honda cbr 600 hurricane fun to blast around on
03-25-2003, 08:23 AM
#3
Registered User
Join Date: Jan 2002
Location: USA
Posts: 3,007
03-25-2003, 10:24 AM
#4
Registered User
Join Date: Sep 2002
Location: Crystal Lake, IL
Posts: 1,286
Re: I need a STELLA Body Kit, Is it possible to get one these days?
Originally posted by T-REX
I really want this kit and only this kit, is there anyway you can still get one? How much do they run? Please let me know ASAP.
Mike
------------------
97'Z28 30th Aniversary Coup-M6(White With Orange Stripes)Pro Performance Stage 2 Heads(282/209@600Lift)Manley Valves(2.01/1.6) 987 CCValve Springs,Comp"R" Lifters,Chromoly Hardened Pushrods,7/16th 1.6 RR,Ported Intake(Orange),CC306,BBK 52mm TB,CSI Electric Water Pump,30LB SVO Injectors,Hurst Short Throw Shifter,Flowmaster Cat-Back,K@N FIPK,Persision 4:10 Gears/MAC girdle,Eaton Posi,Mac Underdrive Pullies,Coated Hooker LT's,IRS Y Pipe,3.5 Flowtech CutOut,HP Timing Chain,Talyor 8mm,NGK TR-6,MSD 6AL,SS Blaster Coil,O2 Sims,LT4 KM,ED Wright Custom Program/160Thermostat,Shift Light@5inch Tach,BMR SFC,STB,Lower Control Arms,Panhard Rod(All Orange)MAC Torque Arm, Eibach Drag Springs,!CATS,MAF Descreened,TB Bypass,!CAGS,1LE Tranny Mount(80-150 Nitrous Wet Shot,RPM Switch,Custom Dual Purge,Bottle Heater,Remote Opener)
Appearance: SS Chrome 17X11 Rims(315/35) Back and Nitto (275/40) Front),4 Inch Cowl Hood,3.5" Straight Chrome Tips,20% Tint,Phanton Nos,Fuel Pressure,Air Fuel Gauges,Chrome Custom Valve Covers,Hurst Nos Shift ****,RK Sport Orange Rear Lettering,(Near FUTURE MODS-Strange 12 Bolt,Denny's DS,Spec Stage 3 Ceramic Clutch,Hals Shocks,55 Inline FP)
I really want this kit and only this kit, is there anyway you can still get one? How much do they run? Please let me know ASAP.
Mike
------------------
97'Z28 30th Aniversary Coup-M6(White With Orange Stripes)Pro Performance Stage 2 Heads(282/209@600Lift)Manley Valves(2.01/1.6) 987 CCValve Springs,Comp"R" Lifters,Chromoly Hardened Pushrods,7/16th 1.6 RR,Ported Intake(Orange),CC306,BBK 52mm TB,CSI Electric Water Pump,30LB SVO Injectors,Hurst Short Throw Shifter,Flowmaster Cat-Back,K@N FIPK,Persision 4:10 Gears/MAC girdle,Eaton Posi,Mac Underdrive Pullies,Coated Hooker LT's,IRS Y Pipe,3.5 Flowtech CutOut,HP Timing Chain,Talyor 8mm,NGK TR-6,MSD 6AL,SS Blaster Coil,O2 Sims,LT4 KM,ED Wright Custom Program/160Thermostat,Shift Light@5inch Tach,BMR SFC,STB,Lower Control Arms,Panhard Rod(All Orange)MAC Torque Arm, Eibach Drag Springs,!CATS,MAF Descreened,TB Bypass,!CAGS,1LE Tranny Mount(80-150 Nitrous Wet Shot,RPM Switch,Custom Dual Purge,Bottle Heater,Remote Opener)
Appearance: SS Chrome 17X11 Rims(315/35) Back and Nitto (275/40) Front),4 Inch Cowl Hood,3.5" Straight Chrome Tips,20% Tint,Phanton Nos,Fuel Pressure,Air Fuel Gauges,Chrome Custom Valve Covers,Hurst Nos Shift ****,RK Sport Orange Rear Lettering,(Near FUTURE MODS-Strange 12 Bolt,Denny's DS,Spec Stage 3 Ceramic Clutch,Hals Shocks,55 Inline FP)
Holy Signature batman!
04-01-2003, 06:54 AM
#9
Registered User
Join Date: Jul 2001
Location: The Ocean State
Posts: 49
That would be me!
Originally posted by 95m6
Yea there is a vizage kit on ebay right now...he wants like 600 or more for it though..just wish I had the money right now.
Yea there is a vizage kit on ebay right now...he wants like 600 or more for it though..just wish I had the money right now.
That would be me. Any questions? Brent this is not an advertisment!
04-01-2003, 03:30 PM
#10
Registered User
Join Date: Jul 2002
Posts: 183
Re: That would be me!
Originally posted by Al@368
That would be me. Any questions? Brent this is not an advertisment!
That would be me. Any questions? Brent this is not an advertisment!
Do you just have a limited number of these kits or will you be suppling these as long as there is a demand?
I really want one except it will probaly be towards the end of summer before I can afford one. I still have to get a front bumper cover and hood before I can even think of ground effects. I'm just trying wanting to ensure that these kits will be able when I finally get the money. Thanks!
Later
04-01-2003, 09:55 PM
#11
Registered User
Join Date: Jul 2001
Location: The Ocean State
Posts: 49
some now more later
Originally posted by 95m6
Yeah I have a few...
Do you just have a limited number of these kits or will you be suppling these as long as there is a demand?
Yeah I have a few...
Do you just have a limited number of these kits or will you be suppling these as long as there is a demand?
04-02-2003, 06:49 AM
#12
Admin Emeritus
Join Date: Dec 1997
Location: Nashville, TN area
Posts: 11,157
Re: That would be me!
Originally posted by Al@368
[B]Brent this is not an advertisment!
[B]Brent this is not an advertisment!
You are PROMOTING a PRODUCT that you are SELLING and will be MAKING MONEY from. THAT is an ADVERTISEMENT.
Please contact us for advertising rates or stop promoting what you are selling. If you have any question, please contact us.
04-02-2003, 08:00 AM
#13
Registered User
Join Date: Jul 2001
Location: The Ocean State
Posts: 49
ADVERTISEMENT?
Originally posted by JasonD
I am sorry, but I disagree. If it is not an advertisement, what do you call it then?
You are PROMOTING a PRODUCT that you are SELLING and will be MAKING MONEY from. THAT is an ADVERTISEMENT.
Please contact us for advertising rates or stop promoting what you are selling. If you have any question, please contact us.
I am sorry, but I disagree. If it is not an advertisement, what do you call it then?
You are PROMOTING a PRODUCT that you are SELLING and will be MAKING MONEY from. THAT is an ADVERTISEMENT.
Please contact us for advertising rates or stop promoting what you are selling. If you have any question, please contact us.
Thread
Thread Starter
Forum
Replies
Last Post
CARiD
Supporting Vendor Group Purchases and Sales
0
01-14-2015 04:00 AM
CARiD
Supporting Vendor Group Purchases and Sales
0
12-26-2014 04:20 AM