I tried shbox's site but there is no PN for the rubber hood/hatch alignment bumpers. I want stock one piece ones not the 2 piece. Mine are either missing or on there last leg...

 

im not sure what the p/n's are but you could try going to a salvage yard to find them.

 

http://sites.google.com/site/branget...e-part-numbers

These are the hood adjustment bumpers for the outer corners of the hood on '93-'97 Camaros. You will need two. These often break over the years because the original part (Part #10157703 -- now discontinued) was not as strong. MSRP is $4.46 each
There are two of these hood adjustment bumpers located near the center of the front bumper as well. These are not broken or missing as often. The original part was the same Part #10157703 (now discontinued) as above, but the current part number is Part #10309494 and the MSRP is $4.39 each.

Associated with these 4 bumpers is a cap that these wear as a hat. These make contact with the hood and typically don't deteriorate over time, but if you are missing a bumper you will need one of these as well. Part #14093705, MSRP is $2.70 each.

 

I will have to order them mine carbonized and stripped out or broke off...
Thanks for the quick replies!

 

Hard to find them, I just picked some up from ebay. My local dealers couldn't find any within 10 states and said the part has been discontinued. Gonna make things interesting in about 5-10 years when this damn plastic starts deterioating again.

 

fbodyrs96 is right cause i got my 93 z28 last march and all my hood bumpers were missing and the hoods alignment was off .... so i went in to the local chevy dealer and they didn't have them so they had to order all of them for me and had them back for me in 2 days. and then just put the caps on the bumpers ans screw them on ...then your good to go