Fuel Rail Covers for '02 LS1
Thread Starter
Registered User
Joined: Apr 2002
Posts: 109
From: Bremerton, WA.
Fuel Rail Covers for '02 LS1
I've been looking for some nice fuel rail covers for the SS. I've seen some for the Trans Am but haven't been able to find for the Camaro. I'd appreciate any links. Are they a real pain to install? Thanks All...
------------------
'02 35th anniversary edition camaro SS, 6spd, hurst, t-tops...K&N filter
------------------
'02 35th anniversary edition camaro SS, 6spd, hurst, t-tops...K&N filter
Registered User
Joined: Jun 2000
Posts: 34
From: The Woodlands, TX, USA
The covers you need are the ones from the 97 vettes, since they have the two cuts for the fuel lines. You can get them from GM Parts Direct, part #'s are: 12556455 and 12559261, but you'll need to alter them to make them fit. Or you can go with the custom ones Rob makes: http://home.ptd.net/~badbird/savage_customs.htm
I don't think you have to cut those. Hope that helps.
------------------
2002 Trans Am
NHRA Package
Mods
80 Series Flowmaster
SLP lid
In the mail: SLP Loudmouth
Times
13.9 @ 102 mph (stock)
RacingWorld
I don't think you have to cut those. Hope that helps.
------------------
2002 Trans Am
NHRA Package
Mods
80 Series Flowmaster
SLP lid
In the mail: SLP Loudmouth
Times
13.9 @ 102 mph (stock)
RacingWorld
Thread Starter
Registered User
Joined: Apr 2002
Posts: 109
From: Bremerton, WA.
<font face="Verdana, Arial" size="2">Originally posted by junk151:
The covers you need are the ones from the 97 vettes, since they have the two cuts for the fuel lines. You can get them from GM Parts Direct, part #'s are: 12556455 and 12559261, but you'll need to alter them to make them fit. Or you can go with the custom ones Rob makes: http://home.ptd.net/~badbird/savage_customs.htm
I don't think you have to cut those. Hope that helps.
</font>
The covers you need are the ones from the 97 vettes, since they have the two cuts for the fuel lines. You can get them from GM Parts Direct, part #'s are: 12556455 and 12559261, but you'll need to alter them to make them fit. Or you can go with the custom ones Rob makes: http://home.ptd.net/~badbird/savage_customs.htm
I don't think you have to cut those. Hope that helps.
</font>
------------------
'02 35th anniversary edition camaro SS, 6spd, hurst, t-tops...K&N filter
Registered User
Joined: Nov 2001
Posts: 19
From: marysville, oh, usa
Do i need to order both part numbers is the 12559261 for the red Z06 ones and # 12556455 for the black ones, if so do I need to order 2 of each not just one?
thank email me if you could
clayton21680@yahoo.com
thank email me if you could
clayton21680@yahoo.com
Thread
Thread Starter
Forum
Replies
Last Post
chevroletfreak
LT1 Based Engine Tech
202
Jul 4, 2005 05:00 PM