are there any sites out there that sell some custom gauge holders particularly for an lt1 camaro. I know I can do the a-pillar gauges, but I would also like some others that wont mount in the a-pillar (IE: Mechanical nitrous pressure gauge) Please direct me in the right direction, thanks.

 

There are some pics of the one I made about half way down page number 2 of the site. It took about 4 hours of actual work....the rest of the time was waiting for stuff to dry. Not hard at all, although it could use some touching up....The a/c still blows plenty out of the side vents on the d/s and p/s of the dash.

www.cardomain.com/memberpage/528388/2

 

Im creating one for the older 4th gen Camaro interiors to put gauges in the center console near the shifter. Much like the one RKSport discontinued. I made one in about 20 minutes as a prototype and I need to work on making another Heres an idea from the one I literally tossed together in 20 minutes.

http://bellkevin.home.comcast.net/camaro/gauge-v1.jpg

I've got a few ideas for it going thru my head. I'll have it setup to hold 2 or maybe 3 gauges when its done.