[PICS] Colored HVAC Knobs, Cobalt Gauges, etc
#1
Update [PICS] Colored HVAC *****, Cobalt Gauges, Pilot 2028 fogs, etc
Finally got around to hijacking a camera from work (although a crappy one) and took some pics.
FIRST: I KNOW my car is dirty as all hell.
Ok, heres what you will see:
Pilot 2028 fogs
Navy Blue Colored Clear HVAC *****
Autometer Cobalt Gauges in a 3 Gauge pillar pod.
Manual Fan switch wires
Fuel Pressure gauge sender and wires
BMR Strut tower bar
Directflo Lid
RKSport Sport Wing
Blackouts
!Grill
and maybe a few others I'm forgetting.
Anyways, Clicky
Update:
Snapped a quick vid of the cobalt gauges:
http://home.mchsi.com/~wraith/alucobalt.wmv
and an exterior shot to get the exhaust:
http://home.mchsi.com/~wraith/aluexh.wmv
FIRST: I KNOW my car is dirty as all hell.
Ok, heres what you will see:
Pilot 2028 fogs
Navy Blue Colored Clear HVAC *****
Autometer Cobalt Gauges in a 3 Gauge pillar pod.
Manual Fan switch wires
Fuel Pressure gauge sender and wires
BMR Strut tower bar
Directflo Lid
RKSport Sport Wing
Blackouts
!Grill
and maybe a few others I'm forgetting.
Anyways, Clicky
Update:
Snapped a quick vid of the cobalt gauges:
http://home.mchsi.com/~wraith/alucobalt.wmv
and an exterior shot to get the exhaust:
http://home.mchsi.com/~wraith/aluexh.wmv
Last edited by Alucard; 10-25-2003 at 02:26 PM.
#3
Where did you buy the triple pillar from? I think Im gonna buy one. I wish I could justify the dough for those cobalt gauges those things look sweet. You need to get some pics of your interior at night, so we can get the full effect
#5
Camaro Guru - Thanks
BIg Dream- I got the pillar from TByrne. Its made by autometer. And yes the Cobalts are expensive, but they are damn cool! Between the pillar and those gauges your looking at 500 bucks. Ill get some night pics either tonight or tomorrow night, and ill update this thread when i do. The next project is to get my gauge cluster to light up like that (i dont like white faced, so i cant just order them).
Flippinz28 - i made them, 97+ ***** are clear underneath the rubber. Peel off the rubber, add the fabric die to boiling water, and let them soak for 2 minutes. Pull them out, let them cool and dry, and youre done. the dye i believe is made by RIT, and you can get it at Walmart
BIg Dream- I got the pillar from TByrne. Its made by autometer. And yes the Cobalts are expensive, but they are damn cool! Between the pillar and those gauges your looking at 500 bucks. Ill get some night pics either tonight or tomorrow night, and ill update this thread when i do. The next project is to get my gauge cluster to light up like that (i dont like white faced, so i cant just order them).
Flippinz28 - i made them, 97+ ***** are clear underneath the rubber. Peel off the rubber, add the fabric die to boiling water, and let them soak for 2 minutes. Pull them out, let them cool and dry, and youre done. the dye i believe is made by RIT, and you can get it at Walmart
#6
Go
looking nice............were gonna have to meet up sometime and do some cruisin in the spring/summer.
________
Cannabis seeds
________
Cannabis seeds
Last edited by MarkyMark; 09-14-2011 at 12:55 PM.
#8
Will the ***** fit...probably.
Will they light up, I dont think so. Its been awhile since I had my 95, but im pretty sure they are not backlit.
Mark, didnt you say youre going into the service?
Will they light up, I dont think so. Its been awhile since I had my 95, but im pretty sure they are not backlit.
Mark, didnt you say youre going into the service?
#11
Go
Originally posted by Alucard
Mark, didnt you say youre going into the service?
Mark, didnt you say youre going into the service?
________
**** Cams
Last edited by MarkyMark; 09-14-2011 at 12:56 PM.
#13
Man those Cobalt guages look sweet, I can't justify $500 dollars for them though, ouch! Car looks real good though man. One last thing you took all those headlight pics but put no explanations as to what they mean like is one stock lights and one aftermarket lights or what. Might want to add some descriptions, lol. Anyways keep that baby clean.