FS: DuraTrax Street Force GP w/Velocity .15 Engine Gas Powered R/C Car

Old Nov 26, 2007 | 07:03 PM
  #1  
Mike96z's Avatar
Thread Starter
Registered User
 
Joined: Jan 2006
Posts: 1,127
From: Dallas, TX
FS: DuraTrax Street Force GP w/Velocity .15 Engine Gas Powered R/C Car

I am selling a DuraTrax Street Force GP w/Velocity .15 Engine Gas Powered R/C Car. I bought this new for $249.99 + got the upgraded parts. Plans for this car were to supply the couple of small parts that need to be replaced on the front suspension and install a Camaro SS Body with SS Wheels which would make this thing look really nice. The body the kit comes with isnt very attractive but its still a body. The Camaro body only cost about $20.00 and the bigger and wider wheels arent too expensive. Just looking to get money to buy the spacers im needing. This thing runs great and starts fine, will come with starter and charger along with controler and gas that I have and fuel fill bottle. Aside from the suspension parts that need to be replaced It is a great car and is for beginner to advanced users. Its 4wd and will run up to 60mph and has multiple gears. I dont really wanna sell but my loss is your gain. Only $25.00 is what it will cost to replace the small parts that are easy to swap with a screw driver. Does come with body. Im selling so I can buy some spacers for my car.

$105 Firm Will Ship! Comes in original box.



You can find the parts here:
http://www3.towerhobbies.com/cgi-bin...=DTXC0050&P=OW

PARTS NEEDED

Front Bulkheads $6.29


Front Wheel Hub $2.69


Chassis $15.99



PARTS (NEW) I BOUGHT

Front Bumper $3.59


Front Strut Tower $3.59


Specs:

Vehicle Type: On-Road
Power Type: Nitro (0-.15)
Body Type: Touring Coupe
Scale: 1/10
Build Type: Pre-Built
Drive Type: 4 WD
Shocks: Oil-Filled
Motor: .15 Velocity Engine
Driver Skill: Beginner
Applications:
- Pavement
- Smooth Track
- Touring Car


Dimensional Specs:
Wheelbase: 10.24 inches (260 mm)
Weight: 3.15 Lbs. (1429 g)
Chassis Length: 13.78 inches (350 mm)
Chassis Width: 7.48 inches (190 mm)
Chassis Height: 4.72 inches (120 mm)
Body Length: 16.85 inches (428 mm)
Body Width: 7.48 inches (190 mm)
Body Height: 4.72 inches (120 mm)
Ground Clearance: .43 inches (11 mm)

SS Camaro Body:
http://www3.towerhobbies.com/cgi-bin...?&I=LXADW3&P=7


Pictures:



Last edited by Mike96z; Nov 26, 2007 at 07:12 PM.
Old Nov 26, 2007 | 07:12 PM
  #2  
Mike96z's Avatar
Thread Starter
Registered User
 
Joined: Jan 2006
Posts: 1,127
From: Dallas, TX
[/IMG]






Pics of Damage:




Old Nov 27, 2007 | 01:14 PM
  #3  
Mike96z's Avatar
Thread Starter
Registered User
 
Joined: Jan 2006
Posts: 1,127
From: Dallas, TX
bump
Old Feb 6, 2008 | 08:19 AM
  #4  
Mike96z's Avatar
Thread Starter
Registered User
 
Joined: Jan 2006
Posts: 1,127
From: Dallas, TX
$50 takes this



















Old Feb 6, 2008 | 08:23 AM
  #5  
Mike96z's Avatar
Thread Starter
Registered User
 
Joined: Jan 2006
Posts: 1,127
From: Dallas, TX
PARTS TO REPLACE (I own the strut tower and front bumper already) so you only have to buy 3 parts and body if you want a different body.









Old Feb 6, 2008 | 09:21 AM
  #6  
Mike96z's Avatar
Thread Starter
Registered User
 
Joined: Jan 2006
Posts: 1,127
From: Dallas, TX
Sold!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Louey
Pacific
1
Dec 25, 2014 03:27 AM
Louey
Pacific
0
Dec 8, 2014 08:01 PM
ro2207
LT1 Based Engine Tech
14
Dec 4, 2014 06:18 PM
The Seer
Classic Engine Tech
2
Nov 26, 2014 05:55 PM
USAirman93
General 1967-2002 F-Body Tech
4
Nov 24, 2014 03:37 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 03:08 AM.